MaxLink PoE switch PSBT-19-16P-250, 18x LAN/16x PoE 250m, 1x SFP, 802.3af/at/bt, 200W
MaxLink PoE switch PSBT-19-16P-250, 18x LAN/16x PoE 250m, 1x SFP, 802.3af/at/bt, 200W
×
0/0
Special offer
Your price excl. VAT
118.28 EUR
Recycling fee | 0.07 EUR |
---|---|
Your price with RF | 118.35 EUR |
Your price incl. VAT (21%) | 143.20 EUR |
blank |
Availability
at our branches
at our branches
Manufacturer |
MaxLink |
|
---|---|---|
Code | 10933007 | |
Part No. | PSBT-19-16P-250 | |
Warranty | 24 months |
You have a choice of 3 variantscompare all
18x LAN, 16x PoE
PSBT-19-16P-250
118.28 EUR
ML-S31D-3
6.34 EUR excl. VAT
7.76 EUR incl. VAT
In Stock
ML-S85D-05
6.62 EUR excl. VAT
8.09 EUR incl. VAT
In Stock
ML-S3155-20
6.34 EUR excl. VAT
7.76 EUR incl. VAT
In Stock
ML-S31D-20
6.62 EUR excl. VAT
8.09 EUR incl. VAT
In Stock
ML-S5531-20
8.70 EUR excl. VAT
10.61 EUR incl. VAT
In Stock
PCU5E-1YW-MS
0.58 EUR excl. VAT
0.70 EUR incl. VAT
In Stock
PCU5E-5-MSC
3.17 EUR excl. VAT
3.84 EUR incl. VAT
In Stock
Parameters
Technical parameters
Connectors and Interfaces
LAN speed:
(16) 10/100Mbps + (2) 10/100/1000Mbps
Optical interfaces:
(1) 1000Mbps Combo
Power
Power type:
Mains power (230V)
PoE type:
PoE-Out (only)
PoE-Out standards:
802.3af, 802.3at, 802.3bt
PoE Out ports:
16
PoE budget [W]:
200
Long range PoE - up to 250m:
Yes
Max. power consumption [W]:
200
Power via connector/terminal:
230V AC
Physical characteristics
Design:
Rackmount
Fans:
(2) 40 x 40 mm
Chassis design:
Metal
Buttons:
Normal / VLAN / 250m
Operating temperature [°C]:
-10 up to 55
Width [mm]:
295
Height [mm]:
45
Depth [mm]:
195
General
Switchning capacity [Gbps]:
7,2
MAC address table:
8000
Jumbo frame [Bytes]:
10240
Packet forwarding rate [Mpps]:
5,4
Product description
PSBT-19-16P-250 is a 16 port 10/100Mbps PoE switch without management with two additional Gigabit LAN ports, which only one is a LAN/SFP combo. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W/port) on ports 1 to 16, even on ports 1 and 2 supports PoE standard 802.3bt (60 W). Ports 17 and 18 serve as uplinks and do not support PoE. The total budget for powering the connected devices is 200 W using the internal power supply. The switch automatically balances the power for individual ports according to the consumption of the device. The Switch can be mounted in a 19" rack thanks to the included accessories.
802.3bt support!
Port 1 and 2 also support the 802.3bt standard, where up to 60 W output power is available for the connected device! Also new are switches equipped with the Watchdog function. If the Ethernet link is not detected for about 1 minute and the power supply is active at the same time, the supply voltage will be interrupted and the connected device will be restarted.
Switch has a manual mode switch
Package contents
Technical support for this product is available on rma@discomp.cz email or sending a request via web form. Our technical support is available during this business hours.
Bussines information
Tomáš Petržílka, +420 702 564 566 , tomas.petrzilka@discomp.cz