UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifi

MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp

ML-S31D-20 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 20km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

ML-S+31D-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices.

ML-S85D-05 is 1.25G SFP module with wave length 850nm, 2 LC connectors for maximal distance 550m with multimode fiber. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products and with others m

ML-S31D-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

The Gigabit PoE injector is used to power most RouteBOARDs or Ubiquiti devices supports passive PoE. This type comes with a standard size 2.1/5.5mm power connector. The PoE injector does not work with 802.3af standard and powering devices

ML-S+85D-03 is multimode 10G SFP+ module with 850nm wave length and 2 LC connectors for link at distance up to 300m. Module is "cisco compatible", so it is compatible with almost all active devices.

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

The ML-ALUBOX is a waterproof IP56 mounting enclosure with mast installation designed for mounting with the MikroTik RouterBOARD RB433 / RB411 / RB711 / RB911 and RB912. The box is fitted with 1 grommet for data / RF cable. The internal dimen

ML-S+3327-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

Lead-acid battery with 12V and 12Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 1m is terminated with crimped connectors, RSMA male on one side and N male on the other. Due to low attenuation

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

The ML-WAP-H is an improved ability to hold any MikroTik wAP unit on a 20-65mm diameter mast that allows elevation and a more stable hold than the plastic or metal strap. No drilling is required to install the MaxLink bracket on the wAP u

Lead-acid battery with 12V and 9Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

MAXPIDIN-S is a single-port Gigabit surge protector from the MaxLink brand designed for indoor use and modern installation on a DIN rail. This surge protector protects your device on all 8 pins and have no problem even with the PoE from w

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

Lead-acid battery with 12V and 55Ah capacity. The battery is equipped with two M6 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

PSBT-10-8P-250 is a 10 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W port) on ports 1 to 8, on port 1 it even supports PoE standard 802.3bt (60

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 3m is terminated with crimped connectors, SMA male on one side and SMA male on the other. Due to low attenuatio

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 2m is terminated with crimped connectors, SMA male on one side and SMA male on the other. Due to low attenuatio

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 5m is terminated with crimped connectors, RSMA male on one side and RSMA male on the other. Due to low attenuat

Lead-acid battery with 12V and 7.2Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.