Optical networks

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

An outdoor cabinet for FTTH installations with the option of pole mounting. A removable panel with optical adapters and trays ensures convenient handling of optical fibers, allowing up to 48 fibers to be stored thanks to 24 duplex SC adapters. An addit

The SM6110-SR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-SR high performance 850nm multi-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connections u

The SM6110-LR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-LR high performance 1310 nm single-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connection

With a passive twin-ax cable assembly of 1 meter and two SFP28 connectors on each side, SM6220-1M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks. Key features

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Huawei OptiXstar EN8255X6s-8X is an XGS-PON and Wi-Fi 6 routing-type ONT. It uses the XGS-PON and Wi-Fi 6 technologies to implement ultra-broadband access, high performance and wide coverage for users. The high forwarding performan

The Huawei OptiXstar EN8245X6s-8N is an intelligent ONT router utilizing XGS-PON and Wi-Fi 6 technologies. It provides ultra-broadband access, high performance, and extensive coverage. The device offers 1x 2.5 Gbit and 3x

The Huawei OptiXstar EG8041X6-10 is a GPON ONT Gateway with support for Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and a maximum transmission speed of 2402 Mb/s on 5 GHz and 574 Mb/s on 2.4 GHz. The ONT unit is equipped with four LAN

DS-P7500-08 is a GPON OLT unit offering 8 XGS-PON/GPON ports, allowing you to connect up to 256 clients per port for XGS-PON or 128 clients per port for GPON, for a total of up to 2048 clients for XGS-PON or 1024 clients for GPO

TP-Link DS-P8000-X2 is a 2U chassis that can be equipped with up to two separately sold service boards, providing up to 32 PON ports. The flexibility of installing service boards allows the device to be adapted to all requirements. The ch

PSU Replacement for TP-Link DS-P8000-X2, dual AC+DC power supply, hot-swap capability and 4KV surge protection.

Service board for DS-P8000-X2 and DS-P8000-X7 chassis, expanding the chassis with 16 GPON ports offering speeds of up to 2.488 Gbps downstream and 1.244 Gbps upstream per port. Supports a split ratio of 1:128 for GPON. Compatible with TP-Link's

Service board for DS-P8000-X2 and DS-P8000-X7 chassis, expanding the chassis with 8 GPON ports offering speeds of up to 2.488 Gbps downstream and 1.244 Gbps upstream per port. Supports a split ratio of 1:128 for GPON. Compatible with TP-Link's C

DS-P7001-01 is a GPON OLT unit with one GPON port supporting up to 128 clients (ONT units) with physical links reaching distances of up to 60 km. It features 1x SFP+ and 1x 2.5 Gigabit Ethernet as uplink, 1 Gigabit Ethernet for man

TP-Link XGS-PON/XG-PON/GPON SFP+ module DS-PMA-Combo C+ is designed for slots in TP-Link OLT units. It is a C+ class module, terminated with an SC connector with UPC polishing, and has a range of up to 20km. The module has different characteris

TP-Link GPON SFP module DS-PMA-C++ is designed for GPON slots in TP-Link OLT units. It is a special SFP module with an asymmetric speed of 2.5Gbps upload and 1.25Gbps download towards clients. The GPON SFP module is termi

TP-Link XGZ030 XGS-PON terminal is ONU unit with mode bridge which delivers 10 Gbps upstream and downstream transmissions simultaneously. Terminal is equiped with SC/APC XGS-PON port and 10Gb/s LAN port. Supports the OMCI (O

TP-Link TL-SM7110-SR is a 40Gbps QSFP+ module with an 850nm wavelength, MPO connector, and a maximum distance of up to 150m over OM3 multimode optical fiber. It supports the OMCI protocol and DDM (Digital Diagnostic Monitori

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 3m or 30m variants. The cable is ideal for creating short connections between switches, routers,

Passive DAC cable for direct connection between two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 30 meters long and is also available in 3m or 0.15m variants. The cable is ideal for creating short connections between switches, rou