SFP optical modules

XS+85LC01D is a multimode SFP/SFP+SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with a wavelength of 850 nm and two LC connectors for connections up to a distance of 100 m. The mod

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

The SM6110-SR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-SR high performance 850nm multi-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connections u

The SM6110-LR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-LR high performance 1310 nm single-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connection

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

TP-Link TL-SM7110-SR is a 40Gbps QSFP+ module with an 850nm wavelength, MPO connector, and a maximum distance of up to 150m over OM3 multimode optical fiber. It supports the OMCI protocol and DDM (Digital Diagnostic Monitori

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 10 km. Key Features Data transfer rate up to 10

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 2 km. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Multi-mode and ensures a range of up to 100 m. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

The TL-SM5110-LR is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission both ways) SFP+ transceiver with support for the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a di

The SM5110LSB-10 is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission in both directions) SFP+ transceiver supporting the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a

Teltonika PR4JR20K is a Gigabit cooper RJ45 transceiver. The module has a range of 100m.

Teltonika PR4LC21K is a set of single-mode 1G SFP WDM modules for data transmission using a single fiber with one LC connector. The wavelength (Tx and Rx) of these modules is 1310 and 1550nm, making them suitable for connections up to 20km

Teltonika PR4DU22K is a 1.25G SFP module with an 850nm wavelength, two LC connectors, and a maximum distance of 550m over multimode optical fiber.

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requireme

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance up to 20 kilometers which can basically satisfy the distance requirement of LAN. Users can choos

TP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 20 Km with TP-LINK´s Routers, Switches, Media Conve

TP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 20Km with TP-LINK´s Routers, Switches, Media Conver

S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM. Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD,

S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transeiv

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.