Powering

High-quality, stabilized white Gigabit PoE power adapter with earthing, LED indication and output voltage 48 V and max. current 0.32 A. The maximum output power is 15,4 W.

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.3A. The maximum output power is 7W. Suitable for these products LBE-5AC-23 LBE-5AC-Gen2b

Ubiquiti Pro Max 16-PoE is a new L3 switch that offers 4x 2.5 Gbps ports with PoE++ up to 60W and 12x 1 Gbps ports with PoE+. The total PoE budget is 180 W. For optical interface connection, there are 2 SFP+ po

Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

Cable reduction with 1 power socket for connection to UPS with IEC connectors. Completely product length is 30 cm.

OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 9W and a maximum out

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting The USW-Flex can be installe

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains (5) Gigabit PoE adapter (5) Power co

U-POE++ from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 60W, which is sufficient for the energy-intensive devices. The

The Ubiquiti UniFi Switch Flex 2.5G is a compact switch designed to expand networks in home and office environments. It features 8x 2.5Gbit ports, enabling easy integration of devices with higher transfer speeds, such as modern access points, se

The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: Interface mana

Průřez vodiče 4,0 - 6,0 mm2; Materiál: elektrolytická měď, pocínovaný; PVC izolace, s rozšířenou izolační objímkou, vhodný pro harmonizované kabely

This solar panel model features 144 cells coated with a 3.2 mm layer of tempered glass, capable of withstanding temperatures from -40 to +85°C, wind pressure up to 2400 Pa, and snow pressure up to 5400 Pa. The

Ubiquiti 10G PoE+++ is a high-quality 10Gbps PoE injector with one PoE output port for powering devices with a voltage of 54V with maximum output power of 90W, which is sufficient for powering energy-intensive devices. Power

USW-Lite-16-PoE is a Gigabit PoE L2 Switch from Ubiquiti in a desktop design with a maximum PoE budget of 45W. A manageable switch with 16 Gigabit metal ports and a total throughput of 16 Gbps. Only 8 ports of 16 support PoE+ powering 802

Ubiquiti UACC-PoE+-2.5G is an adapter that can power UniFi PoE+ devices, reduce dependency on PoE switch power, and provide a Multi-Gigabit LAN connection. Delivers up to 30W of PoE+ Surge, peak pulse, and overc

The USW-Lite-8-PoE is a fully managed Layer 2 switch with 8 Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide upto a total PoE wattage of 52W for UniFi Access Points or oth

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

The Ubiquiti USW-Pro-8-PoE is a new switch that offers up to 6 POE/POE+ ports capable of delivering up to 30 W, as well as 2 POE++ ports that can deliver up to 60 W. The total maximum output power is 120 W. The switch has 2 SFP+ ports with speeds up to

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

Power 12V adapter suitable especially for powering some routers and switches with a standard DC connector 5.5 / 2.1mm. The maximum current consumption is 1 A.

The Ubiquiti USW-Pro-Max-48-PoE is a 48-port PoE switch with L3 feature support. It offers 16x 2.5Gb ports, where 8 ports support POE++ up to 60W per port, and an additional 8 ports support POE+ up to 30W per port. Additionally, there are

A compact, 8-port, Layer 2 GbE PoE switch with versatile mounting options. The switch has 1 PoE in port and 7 PoE out ports with PoE 802.3af/at with max wattage 30W per port. Switch is managed by UniFi network providing central man

The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen, compact size, and fanless

Lead-acid battery with 12V and 100Ah capacity. The battery is equipped with two M8 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

The second generation UniFi switches bring many changes and improvements, the switches have been redesigned from the ground up. Compared to the first generation, there is a significant improvement in airflow, which is used for cooling, ma

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su