Optical networks

Masterlan optic splice tray with cover is suitable for up to 12 splices. Splice trays can be stacked.

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 2 pieces.

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan duplex optic fibre coupler for LC connectors with APC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan "@" anchor is built to fully respect the minimum bend radius of the optic fibre cable. Thanks to this, zero attenuation during tension is ensured. The attenuation reaches low values. There is no deformation of the optic fibre cable or

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

FC-SM-300 is 90 meter outdoor single mode optical cable with 6 LC connectors on each side. With this cable you save the cost of renting an optical splicer and related material. The cable is suitable, for example, for galvanic is

Masterlan DROPX is fiber optic drop cable suitable for both indoor and outdoor use. Used fibers are high quality Corning (G.657.A2) with perfect flexibility. Aramid yarn serves as strength and protective member. The Cable is completed with LSZH and UV

TP-Link XGZ030 XGS-PON terminal is ONU unit with mode bridge which delivers 10 Gbps upstream and downstream transmissions simultaneously. Terminal is equiped with SC/APC XGS-PON port and 10Gb/s LAN port. Supports the OMCI (O

TP-Link TL-SM7110-SR is a 40Gbps QSFP+ module with an 850nm wavelength, MPO connector, and a maximum distance of up to 150m over OM3 multimode optical fiber. It supports the OMCI protocol and DDM (Digital Diagnostic Monitori

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 3m or 30m variants. The cable is ideal for creating short connections between switches, routers,

Passive DAC cable for direct connection between two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 30 meters long and is also available in 3m or 0.15m variants. The cable is ideal for creating short connections between switches, rou

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 3 meters long and is also available in 30m or 0.15m variants. The cable is ideal for creating short connections between switches, routers,

4-channel CWDM Mux/Demux (1270 to 1330 nm) designed to increase the capacity of existing optical infrastructure, with rack-mountable options.

8-channel CWDM Mux/Demux (1450 to 1590 nm) designed to increase the capacity of existing optical infrastructure, with the option for rack mounting.

Obsah balení; Spojovací box, 4x kazeta; (24) SC/APC spojka; (48) ochrana sváru; Sada pro uchycení na zeď; Drobný instalační materiál;

Praktická sada nástrojů pro práci s optickými kabely obsahuje nezbytné nástroje pro práci instalačního technika. Základní nástroje slouží pro přípravu optického vlákna ke svařování a ke kontrole nově vytvořené či stávající trasy. Obsah balení; Měřák vý...

The optical fiber visual fault locator (VFL) with a power output of 30mW emits a visible red laser beam with a wavelength of 650nm. The device can emit either a continuous beam (CW mode) or a pulsed beam (GLINT mode). When the beam encounters an obstac

The optical fiber visual fault locator (VFL) with a power output of 10mW emits a visible red laser beam with a wavelength of 650nm. The device can emit either a continuous beam (CW mode) or a pulsed beam (GLINT mode). When the beam encounters an obstac

The cleaning pen for 2.5mm ferrules is compatible with SC/FC/ST/E2000 connectors, regardless of the polishing type (APC/UPC). Simply place the tool onto the ferrule and press to clean its surface. The pen can just as easily be used to clean a connector

The cleaning pen for 1.25mm ferrules is compatible with LC connectors, regardless of the polishing type (APC/UPC). Simply place the tool onto the ferrule and press to clean its surface. The pen can just as easily be used to clean a connector already in

Dry, dust-free wipes are designed for cleaning optical fibers and cables. They can be used either dry or moistened with isopropyl alcohol. The package contains 280 pieces, and the dimensions of the wipes are 11 x 21 cm.

Cassette type fibex cleaner, compatible with SC, LC, FC, ST, E2000, MPO female, and other connectors. The cleaning antistatic high-density textile fiber tape provides up to 500 cleanings using a non-alcoholic method (contains no liquid substances).