UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifi

ML-S+31D-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices.

Pigtail with u.Fl and N female, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. This is a quality reduction, eg for connection to miniPCI cards, etc.

ML-S31D-20 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 20km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

ML-S31D-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

PSBT-6-4P-250 is a 6 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W/port) on ports 1 to 4, on port 1 even supports PoE standard 802.3bt (60 W).

ML-SFP-RJ45-1G is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Maximum distance range is 100m.

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

Set for mounting the antenna holders and distributors on the wall - 10mm. Package contains (4) Screw with a hexagonal head - 6 x 70mm - (zinc material) (4) Plastic dowel - 10 x 60mm - universal

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

ML-S+85D-03 is multimode 10G SFP+ module with 850nm wave length and 2 LC connectors for link at distance up to 300m. Module is "cisco compatible", so it is compatible with almost all active devices.

The Gigabit PoE injector is used to power most RouteBOARDs or Ubiquiti devices supports passive PoE. This type comes with a standard size 2.1/5.5mm power connector. The PoE injector does not work with 802.3af standard and powering devices

Lead-acid battery with 12V and 9Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, MikroTik devices with input voltage 48V DC. The power adapter has a maximum power 38W and a maximum output current 0.8A. A power

The ML-ALUBOX is a waterproof IP56 mounting enclosure with mast installation designed for mounting with the MikroTik RouterBOARD RB433 / RB411 / RB711 / RB911 and RB912. The box is fitted with 1 grommet for data / RF cable. The internal dimen

The ML-WAP-H is an improved ability to hold any MikroTik wAP unit on a 20-65mm diameter mast that allows elevation and a more stable hold than the plastic or metal strap. No drilling is required to install the MaxLink bracket on the wAP u

5dBi omnidirectional antenna with a magnetic stand. Package includes 1 m long cable with RSMA male connector. Antenna is ideal for building home network.

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

ML-S85D-05 is 1.25G SFP module with wave length 850nm, 2 LC connectors for maximal distance 550m with multimode fiber. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products and with others m

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

The PoE injector is suitable for powering up to eight devices supporting passive PoE. To LAN ports on one side connect device without power supply eg switch, on the other side connect devices using passive PoE - WiFi, VoIP or other devices supporting p

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 3m is terminated with crimped connectors, N male on one side and N male on the other. Due to low attenuation an

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi