Optical networks

Masterlan DROPX is fiber optic drop cable suitable for both indoor and outdoor use. Used fibers are high quality Corning (G.657.A2) with perfect flexibility. Aramid yarn serves as strength and protective member. The Cable is completed with LSZH and UV

The Huawei OptiXstar EG8145X6-10 is an intelligent GPON and Wi-Fi 6 routing-type ONT. It uses the GPON Wi-Fi 6 technology to implement ultra-broadband access, high performance and wide coverage for users. The high forwarding performance e

An integral part of Huawei's all-optical access solution, OptiXstar EG8010Hv6-10 is a bridging-type Optical Network Terminal (ONT) that uses Gigabit Passive Optical Network (GPON) technology to offer ultra-broadband access. With high forw

Masterlan FBOXSC2 is a very compact optic socket/box on a plaster with a height of only 23mm. It is the ideal product for building FTTH metro networks (Fiber To The Home). Allows ending with SC / LC duplex / E2000 connectors. The socket can b

Masterlan FBOXSCLCD2+2 is a 25mm-thick optic socket outlet. It is the ideal product for building FTTH metro networks (Fiber To The Home). Allows to ending 2x SC simplex / 2x LC duplex or 2x E2000 simplex connectors. The socket can be screwed

Masterlan splice protection 45mm long, 2.2mm diameter and 1mm steel reinforcement to accommodate most optical cassette combs.

Masterlan splice protection 60mm long, 2.2mm diameter and 1mm steel reinforcement to accommodate most optical cassette combs.

The Huawei OptiXstar EG8041X6-10 is a GPON ONT Gateway with support for Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and a maximum transmission speed of 2402 Mb/s on 5 GHz and 574 Mb/s on 2.4 GHz. The ONT unit is equipped with four LAN

Masterlan "@" anchor is built to fully respect the minimum bend radius of the optic fibre cable. Thanks to this, zero attenuation during tension is ensured. The attenuation reaches low values. There is no deformation of the optic fibre cable or

Outdoor FTTH connection box with Allen key lock, gray color, made of ABS material and is used for connecting/terminating up to 8 fibers and storage of 4 optical connectors thanks to the integrated optical cassette. T

Masterlan duplex optic fibre coupler for SC connectors with UPC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

Masterlan simplex optic fibre coupler for SC connectors with UPC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one SC connector with UPC endface polishing. Cable length 1.5 m

ML-S+3327-20 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 20km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fiber is made from G.657.A2 ty

ML-S+2733-20 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 20km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD,

Masterlan duplex optic fibre coupler for LC connectors with UPC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switches or

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

UACC-OADP-SC-APC-50 optical adapter from Ubiquiti simplex with SC connector on each side with APC polishind type, designed for singlemode cables. It is used for connecting eg two optical patch cables. The package contains 50 pieces of these connectors.

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

ML-S+3327-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cabl

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

ML-S+31Dout-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices. The advantage of this pro

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2