Accessories

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.

U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD

Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r

Protective cover for the U7 Pro that can be painted for a custom appearance. Compatible coloring materials Spray can (Krylon/Telox) Acrylic color Pos

The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.

nHD-cover-Black-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Black design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE i

Ubiquiti U7 Pro Wall Paintable Flush Mount is a thoughtfully designed mount that allows you to hide the device directly in the wall. You then attach a cover that can be painted with any color, allowing it to blend seamlessly with any design.

The MOX G module with a mPCIe slot allows you to connect a compatible Wi-Fi card to achieve significantly higher speeds than SDIO (we recommend the original mPCIe MOX Wi-Fi add-on). It also has a SIM card slot for users who are considering a mPCIe LTE

Wireless set of two adhesive antennas with pigtails terminated with u.Fl connectors and Dual Band WiFi 6 cards with Mediatek MT7915DAN chipset, miniPCI-e bus with 2x u.Fl connectors, supporting WPA2 encryption, modulation speed

The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws

The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in

The holder is designed for attaching TP-Link Archer NX200 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.

The holder is designed for mounting TP-Link wireless units EAP115/230/650-Wall and smart switches Tapo S210/S220 on a wall. The holder is made of PETG material using a 3D printer and comes in white color.

The plastic holder with a built-in box is intended for attaching TP-Link cameras VIGI C400, C420, C430 and C450 to the wall using two screws. The holder can be installed above and below the camera and its base fits exactly on the socket i

The OJB-100 is your go-to solution for seamlessly installing Omada and Festa wall plate APs directly onto bare walls. Compatible with models like EAP775-Wall V1.0, EAP725-Wall V1.0, Festa F65-Wall V1.0, EAP655-Wall V1.0 and EAP615-Wall V1.0. Thi

The APM-103 significantly enhances installation flexibility with ±45° vertical and ±45° horizontal adjustments, allowing you to easily position the Omada EAP650 D30-Outdoor and EAP650 D120-Outdoor for optimal performance. This versatile s

Sleek, magnetic wall mount for UniFi Express 7. Package Content Mount

Elegant table stand for a Swiss Army Knife Ultra (UK-Ultra).

Pole mount that supports up to 4 Ubiquiti Wave AP Micro or Wave AP Gen2 devices. Suitable for poles with a diameter of 25-76mm.

Product description prepares.

Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws

RJ45 Waterproof kit is a cable gland Ethernet kit for separating indoor and outdoor cabling when mounting in any mounting box. On the outside there is a keystone with an RJ45 connector and on the inside there is a 20 cm FTP cable with a shielded TP cab

Plastic inwall juction box is suitable for installation of UniFi AP In Wall HD (UAP-IW-HD). The mounting box has several holes on the back side for attaching or inserting the Ethernet cable. The box also has 2 pillar for attach UAP unit. The

The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.

Mast holder without tilt, mast diameter 25 - 77 mm, for Cambium's cnWave V5000 units

WiFi card RTROM01-WS3294 is a wireless miniPCI-e card with 4× u.Fl connectors, support for WPA2 encryption, modulation speed up to 1733 Mbps in the 5GHz band (4×4 MU -MIMO) or 600 Mbps in the 2.4GHz band (4×4 MU-MIM

The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.

The holder is designed for attaching TP-Link HX510 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.

Wall mount for Unifi Access Points. It is made from plastic and weights only 160 grams. Dimensions are 200,5 x 175,1 x 31,2 mm. Compatible devices U7-Pro U7-Pro-Max