Active PoE

Outdoor PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

Internal PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

The GPeR unit allows to extend Ethernet cable by additional hop (

TL-POE160S is a very robust Gigabit power PoE injector that supports 802.3af/at standards with power up to 30W, which is a suitable solution for powering most IP cameras, VoIP, WiFi AP and other devices. The injector has an LED indication

Maxlink POE-CON-AFAT-24 is an indoor PoE converter that changes active power supply to passive. It converts from input PoE 802.3at (44-56V) to passive 24V. Input: 802.3at (44-56V) Output: 24V, max. 1A

Internal cable reduction from Ethernet to USB-C port, which is used for power supply and data transfer and is intended only for the following products from Ubiquiti:

MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp

The Long-range Indoor/Outdoor Repeater (UACC LRE) is Gigabit adapter that allows you to easily and inexpensively expand your Ethernet network's range. With its (2) GbE RJ45 ports, the UACC LRE can receive 802.3af/at PoE/PoE+ while providing passthrough

MaxLink MAXPIDIN30 is an active PoE injector with DIN rail mounting with input DC power supply 12 to 48V. The output of this power source is a Gigabit port with 802.3af/at PoE (55V) designed for WiFi, VoIP or wireless links. PoE is distri

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your netw

Internal PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

Cambium Network - Gigabit Poe injector N000900L017B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 15W, which is sufficient for the devices such as cnPilot

The product has complete package. Please see the photos in gallery. MaxLink PI120 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consum

MaxLink PI60 EXT 1x2 is an industrial PoE extender with three 10/100/1000 Mbps ports, 1x PoE-in port supporting 802.3bt/PoE++ with a power output of 60W or higher, up to a maximum of 95W and 2x PoE-out ports providing up to 30W each with

The Mikrotik GPER14i is a manageable outdoor PoE extender, perfect for extending power to your outdoor devices such as Wi-Fi access points and IP cameras. It features 4x Gigabit LAN ports, with 1 port supporting PoE-IN (802.3bt, 90W) and

A pair of extenders that allow you to extend PoE over twisted pair or coaxial cables. This solution is ideal for situations where replacing the original cabling is not an option. Each extender features a 1x 10/100 Mbit ETH port and a two-pin con

Cambium Networks - Gigabit Poe injector N000000L034B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 30W, which is sufficient for the devices such as: e6

S tímto adaptérem můžete napájet Raspberry PI i jiné jednodeskové počítače a další zařízení s napájením přes USB type C konektor. Díky tomu můžete tato zařízení velmi flexibilně použít a nepotřebujeme žádnou zásuvku ani síťový adaptér. Tímto adaptérem ...

TL-POE170S is a very robust Gigabit power PoE injector that supports 802.3af/at/bt standards with a power of up to 60 W, which is a suitable solution for PTZ power supply cameras, LED panels, more powerful Wi-Fi APs and other devices. The

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

Cambium Networks - 10GbE PoE injector C000000L141A is a high-quality 10GbE PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 60W, which is sufficient for the devices such

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

With this adapter, you can power Raspberry PI (all models), other single-board computers, and other devices powered by the Micro USB connector. This allows you to use these devices very flexibly and we don't need a power outlet or AC adapter. T