Powering

The USW-Lite-8-PoE is a fully managed Layer 2 switch with 8 Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide upto a total PoE wattage of 52W for UniFi Access Points or oth

MikroTik OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 24W and a ma

A 5V power adapter suitable especially for powering some routers and switches with a standard 5.5/2.1mm DC connector. The maximum current drawn is 0.6A.

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

The Ubiquiti UniFi Switch Flex 2.5G PoE is a compact switch designed to expand networks in home and office environments, particularly for connecting powered devices. It features 8x 2.5Gbit ports with PoE 802.3af/at/bt (POE++ 60W) support, enabli

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

PoE injector POE1A2L is used to power WiFi devices via Ethernet cable using so-called passive PoE. This PoE injector has 2.1/5.5mm power connector and two Ethernet ports, of which the port labeled PoE is toward the powered device. Passive PoE is

High-quality, stabilized white Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.32A. The maximum output power is 15,4W.

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Etherne

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. Package contains (5) PoE adapter (5) Power cord

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication, output voltage 24V and max. current 1A. The maximum output power is 24W. The power adapter is made in white color. Package contains PoE adapt

The F-21-55 is a power adapter from a two-pole terminal block to a socket for a standard DC jack with a size of 2.1/5.5mm. Adapter is suitable, for example, when you need to connect an LED strip to your power adapter, which has prepared cables m

Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead

MikroTik OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, shorter LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum po

Ubiquiti UACC-PoE+-2.5G is an adapter that can power UniFi PoE+ devices, reduce dependency on PoE switch power, and provide a Multi-Gigabit LAN connection. Delivers up to 30W of PoE+ Surge, peak pulse, and overc

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 50V and max. current 1.2A. The maximum output power is 60W. It is not backward compatible with 100Mbps devices due to the power supply that runs through

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 48W and a maximum output current 2A

Lead-acid battery with 12V and 55Ah capacity. The battery is equipped with two M6 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 96W and a maximum output current 4A

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. This model has power on all 4 pairs. The PoE adapter is only compatible with 1Gbps devices tha

USW-24-POE is a configurable Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and 2 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options

USW-Flex-Mini is a tiny 5-port Gigabit switch managed by UniFi Controller from Ubiquiti in a desktop version with the first port supporting PoE In. PoE IN over Eth1 Its biggest advantage is the Gigabit POE IN on port #1 for

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains (5) Gigabit PoE adapter (5) Power co

POE-BOX8-G is a passive Gigabit PoE injector suitable for powering up to 8 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For poweri

Internal PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

The Ubiquiti UACC-Adapter-AC-210W is a power adapter for connection to a 230V electrical network, designed not only for powering UniFi PoE switches but also other devices requiring an input voltage of 54V DC with a power output of