Accessories

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.

Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws

The 5 GHz RocketDish to airFiber® Antenna Conversion Kit, model AF-5G-OMT-S45, converts the RocketDish RD-5G30 or RD-5G34 antenna for use with the airFiber AF-5X radio.

U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD

nHD-cover-Marble-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Marble design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE

The OJB-100 is your go-to solution for seamlessly installing Omada and Festa wall plate APs directly onto bare walls. Compatible with models like EAP775-Wall V1.0, EAP725-Wall V1.0, Festa F65-Wall V1.0, EAP655-Wall V1.0 and EAP615-Wall V1.0. Thi

The MOX E module is an ideal choice if you need more ethernet ports to connect devices to your network. It has twice the width of the other modules and contains an eight-port manageable switch for gigabit ethernet. Compatibility U

nHD-cover-Concrete is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Concrete design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The holder is designed for attaching TP-Link Archer NX200 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.

Wall cover for U7-Pro-Wall, which can be painted to customize its appearance.

nHD-cover-Wood-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Wood design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is n

The MOX G module with a mPCIe slot allows you to connect a compatible Wi-Fi card to achieve significantly higher speeds than SDIO (we recommend the original mPCIe MOX Wi-Fi add-on). It also has a SIM card slot for users who are considering a mPCIe LTE

Přestavba jednopolarizačních antén JRC-24 a JRC-24 EXTREM na dvoupolarizační přestavbou získáte plnohodnotné antény JRC-24 MIMO nebo JRC-24EX MIMO . V balení je celá sada nerezového spojovacího materiálu. Jedná se o balení pro jednu anténu. Tato verze ...

The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.

WiFi card RTROM01-WS3294 is a wireless miniPCI-e card with 4× u.Fl connectors, support for WPA2 encryption, modulation speed up to 1733 Mbps in the 5GHz band (4×4 MU -MIMO) or 600 Mbps in the 2.4GHz band (4×4 MU-MIM

The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

Wireless set of two adhesive antennas with pigtails terminated with u.Fl connectors and Dual Band WiFi 6 cards with Mediatek MT7915DAN chipset, miniPCI-e bus with 2x u.Fl connectors, supporting WPA2 encryption, modulation speed

Product condition: Used piece for exhibition purposes. Fully functional. Mast holder without tilt, mast diameter 25 - 77 mm, for Cambium's cnWave V5000 units

Propojovací kablík je primárně určen pro wi-fi moduly Turris Omnia k propojení s diplexerem a externí anténou. Lze však použít i s jinými zařízeními, které pracují na max frekvenci 6 GHz; VF kabelová redukce (pigtail) řady U.FL(f) s kabelem RF1.13/0.81...

Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.

Plastový držák je určený pro uchycení vybraných TP-Link produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 226 x 131 x 35mm. Kompatibilní ...

The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.

The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color

WiFiMan Wizard is a portable spectral analyzer designed for the WiFiMan iOS and Android mobile application with which it communicates wirelessly via Bluetooth. Together with a Lidar-equipped smartphone, it is able to project t

The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible

IW-HD-BK is a cover for Ubiquiti UAP In-Wall HD with a black theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-CF je kryt k Ubiquiti UAP In-Wall HD s maskovaným motivem. Pro náročné zákazníky je na výběr celkem z 5ti volitelných motivů krytů. Na četné žádosti zákazníku jsme se rozhodli kryty prodávat také po jednotlivých kusech, balení produktu tak není v...

IW-HD-CT is a cover for Ubiquiti UAP In-Wall HD with a concrete theme. For demanding customers, there are a total of 5 optional cover designs to choose from.