Accessories

The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r

Protective cover for the U7 Pro that can be painted for a custom appearance. Compatible coloring materials Spray can (Krylon/Telox) Acrylic color Pos

WiFiMan Wizard is a portable spectral analyzer designed for the WiFiMan iOS and Android mobile application with which it communicates wirelessly via Bluetooth. Together with a Lidar-equipped smartphone, it is able to project t

The Ubiquiti U7 Pro Wall Table Stand is an elegant and very light table stand for the Ubiquiti U7 Pro Wall device.

Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws

The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in

nHD-cover-Black-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Black design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE i

The OJB-100 is your go-to solution for seamlessly installing Omada and Festa wall plate APs directly onto bare walls. Compatible with models like EAP775-Wall V1.0, EAP725-Wall V1.0, Festa F65-Wall V1.0, EAP655-Wall V1.0 and EAP615-Wall V1.0. Thi

The holder is designed for attaching TP-Link switches to a DIN rail holder. It is made of PETG material on a 3D printer in a grey anthracite color. Dimensions: 101x25mm Compatible products: SG108xx, SF1006P, ER605, RP1

The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.

U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD

Precision Alignment Kit to better attach the antenna. Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance. Applies to the following models airFiber®AF-5G30-S45 PowerBeam ™

nHD-cover-Wood-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Wood design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is n

Plastic holder manufactured using 3D printing technology with PETG material, designed for mounting the Deco BE25 unit on the wall or ceiling, with three screw holes.

The Dual Band WiFi 6 card model AW7915-NP1 features a miniPCI-e interface with 4 × u.Fl connectors, supporting WPA3 encryption and modulation speeds of 2401 Mbps in the 5 GHz band (4×4) or 574 Mbps in the 2.4 GHz band with

NanoHD-RetroFit-3 is a mounting kit for attaching the UAP-nanoHD unit to the wall or ceiling with the original UAP, UAP-LR mounts. Once mounted, your UAP-nanoHD, U6 Lite or U6+ will blend in with the walls because the Retrofit Mount kit elimina

The plastic holder with a built-in box is intended for attaching TP-Link cameras VIGI C400, C420, C430 and C450 to the wall using two screws. The holder can be installed above and below the camera and its base fits exactly on the socket i

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

This plastic mounting box made of PVC material is suitable for installing the UniFi AP In Wall model in a plasterboard wall. For proper holding in plasterboard, 2 screws in opposite corners with plastic flags serve as a support against sliding the box

RJ45 Waterproof kit is a cable gland Ethernet kit for separating indoor and outdoor cabling when mounting in any mounting box. On the outside there is a keystone with an RJ45 connector and on the inside there is a 20cm FTP cable with a shielded TP cabl

Excellent plastic holder designed to places where it is not possible to drill through the suction cup so it can be mounted on the window. The holder can be locked in all directions.

Excellent plastic holder designed for places where it is not possible to drill, so thanks to the suction cup it can be mounted from the inside of the window. The bracket is compatible with NBE-5AC-16 and NBE-M5-16.

Precise GPS Synchronization Using a common GPS timing reference, the airFiber X radios work cohesively to deliver powerful, multi-Gigabit bridging performance for PtP links. 4x4 M

Precise GPS Synchronization Using a common GPS timing reference, the airFiber X radios work cohesively to deliver powerful, multi-Gigabit bridging performance for PtP links. 8x8 M

Přestavba jednopolarizačních antén JRC-24 a JRC-24 EXTREM na dvoupolarizační přestavbou získáte plnohodnotné antény JRC-24 MIMO nebo JRC-24EX MIMO . V balení je celá sada nerezového spojovacího materiálu. Jedná se o balení pro jednu anténu. Tato verze ...

Přestavba jednopolarizačních antén JRC-24 a JRC-24 EXTREM na dvoupolarizační přestavbou získáte plnohodnotné antény JRC-24 MIMO nebo JRC-24EX MIMO . V balení je celá sada nerezového spojovacího materiálu. Jedná se o balení pro jednu anténu. Tato verze ...

Přestavba jednopolarizačních antén JRC-29 a JRC-29 EXTREM na dvoupolarizační přestavbou získáte plnohodnotné antény JRC-29 MIMO nebo JRC-29EX MIMO . V balení je celá sada nerezového spojovacího materiálu. Jedná se o balení pro jednu anténu. Tato verze ...

Přestavba jednopolarizačních antén JRC-29 a JRC-29 EXTREM na dvoupolarizační přestavbou získáte plnohodnotné antény JRC-29 MIMO nebo JRC-29EX MIMO . V balení je celá sada nerezového spojovacího materiálu. Jedná se o balení pro jednu anténu. Tato verze ...