IoT, SMART
Cameras, security
LAN networks
Powering
Tools
Optical networks
Computers
Cabinets
Poles, brackets
Protective cap for RJ45 with latch protection, grey color
Protective cap with latch protection for RJ45 connectors. The cover is gray and is suitable for distinguishing individual cables connected in data cabinet, switches or patch panel.
U-Bolt M10 100mm 74-001975
Replacement bracket for mast brackets with angle. 100 mm pitch. 10 mm diameter. Thread length 100mm The caliper can be attached to a 89mm diameter pole Surface treated with galvanic zinc.
Cable ties black 10cm, 2,5mm width, 1pcs
Cable tie for binding cables into one bundle or attaching an object. Suitable for outdoor use, length 10.cm. Label dimensions - 25.3x8.2mm
Schuko to UK/IRL 13A plug adapter SCP3
European EU Schuko to UK 3 Pin Converter Plug 13A, Black (Grounded). A mains adaptor allowing mains leads with European type circular Schuko plugs to be converted into UK, 3-pin mains plug. Suitable for straight and most right angle Sch
Protective cap for RJ45 with latch protection, blue color
Protective cap with latch protection for RJ45 connectors. The cover is blue and is suitable for distinguishing individual cables connected in data cabinet, switches or patch panel.
OEM RF Coax cable RF240 1m
RF240 is coaxial cable for high frequency applications. it is suitable as connecting cable in wireless telecommunication systems for antennas. The cable is flexible, with low attenuation. It is a cable with a polyurethane foam dielectric.
Protective cap for RJ45 with latch protection, red color
Protective cap with latch protection for RJ45 connectors. The cover is red and is suitable for distinguishing individual cables connected in data cabinet, switches or patch panel.
PVC insulating tape 15 mm / 10m black
PVC insulation tape suitable, for example, for untying or marking cables. The tape is 15mm wide, 10m long and has a black color.
Gewiss GW44208 waterproof box assembly
Jedná se o bezhalogenovou vodotěsnou montážní krabici s označením Gewiss GW44208 a montáží na zeď. Vnitřní rozměry jsou 240 x 190 x 90 mm, stupeň krytí IP56. Vnitřní rozměry jsou 240 x 190 x 90 mm. *Se souvisejícím příslušenstvím je možné montážní krab...
Raspberry Pi 3B+ UniFi Controller, rackmount
Raspberry Pi 3B + UniFi Controller is a compact device with pre-installed UniFi Controller with the possibility of remote management of all Unifi AP units based on the very high-quality HW platform Raspberry Pi 3B+ with enough powe
Cable adapter from UPS (IEC C14) to 1 socket 230V, 30cm
Cable reduction with 1 power socket for connection to UPS with IEC connectors. Completely product length is 30cm.
PVC insulating tape 15 mm / 10m white
PVC insulation tape suitable, for example, for untying or marking cables. The tape is 15mm wide, 10m long and has a white color.
OEM gigabit PoE adapter 24V/1A (24W), w/power cable (EU)
NU24-F240100-I2 is a high-quality stabilized Gigabit PoE power adapter / injector with ground, LED indication, 24V output voltage and 1A max. current. The maximum output power is 24W. Compared to standard injectors, it powering over all 8 wire (4 pairs
Antenna holder on mast "L", lenght 20cm, height 20cm, d=42mm + 1x U-Bolt 100mm
Antenna console type "L", length 20 cm, height 20 cm, with one bracket for mounting on the mast. The surface of the holder is treated with galvanic zinc.
U-Bolt M8 74mm 74-001967
Třmen do průměru trubky max 66mm.
Gewiss GW44209 waterproof box assembly
Jedná se o bezhalogenovou vodotěsnou montážní krabici s označením Gewiss GW44209 a montáží na zeď. Vnitřní rozměry jsou 300 x 220 x 120 mm, stupeň krytí IP56. Vnitřní rozměry jsou 300 x 220 x 120 mm. *Se souvisejícím příslušenstvím je možné montážní kr...
Pole holder for diameter 60mm - movable 10-25cm
Držák jezdec pro stožár o průměru 60 mm s jedním zajišťovacím šroubem stožáru a jedním zajišťovacím šroubem pro zajištění posouvané části s odsazením 5 až 270 mm od zdi či krovu; a možností natočení. Základna (100x100 mm) pro kotvení je opatřena čtyřmi...
Antenna holder on mast "L", lenght 35cm, height 25cm, d=42mm + 1x U-Bolt 100mm
Držák antén 35cm dlouhý, 25cm vysoký (venkovní hrana) s jedním třmenem k uchycení na stožár a průměrem trubky 42mm. Povrch držáku je upraven galvanickým zinkem.
Antenna holder on the mast or wall "T" lenght 18cm, height 15cm
Antenna console type "T" for mounting on the mast, length 18 cm, height 15 cm, with one bracket for mounting on the mast. The surface of the console is treated with galvanic zinc. The product is especially suitable for NanoStation M products.
ODR-wAP Interference suppression cover for RB wAP
Odrušovač pro MikroTik RB wAP snižuje nežádoucí interferenční rušení ze zadní strany a z bočních stran. Ochraňuje signál jen v žádoucí oblasti. Odrušovač spolu se zadním krytem nezvyšuje zisk antény, avšak výrazně snižuje nežádoucí rušení a díky tomu z...
PVC insulating tape 15 mm / 10m yellow-green
PVC insulation tape suitable, for example, for untying or marking cables. The tape is 15mm wide, 10m long and has a yellow-green color.
Antenna holder for mast "L", lenght 50cm, height 20cm, d=42mm + 1x U-Bolt 100mm
Antenna console type "L", length 50cm, height 20cm, with one bracket for mounting on the mast. The surface of the console is treated with galvanic zinc.
Antenna wall-mount "L" lenght 8,5cm, height 12cm, d=32mm with strap base
Antenna console for wall mounting. The distance from the wall is 85mm, the effective height is 120mm and the diameter of the holders tube is 32mm.
Pole clutch double-sided + 2x U-Bolt 100mm
Stožárová spojka pro spojení dvou stožárů. Třmeny lze uchytit na tyče o průměru 25 - 89 mm. Povrchově upraveno žárovým zinkem.
Protective cap for RJ45 with latch protection, green color
Protective cap with latch protection for RJ45 connectors. The cover is green and is suitable for distinguishing individual cables connected in data cabinet, switches or patch panel.
Antenna holder on mast "L", lenght 35cm, height 20cm, d=42mm + 1x U-Bolt 100mm
Antenna holder is 35 cm long, 20 cm high with one bracket for mounting on a mast pole. The surface of the holder is treated with galvanic zinc.
OEM Power Adapter 24V 0,38A for RouterBOARD, ALIX
OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 9W and a maximum out
CEE7 to UK/IRL plug adapter CP1
Fused at 3A, Voltage: 220-250V Max load: 600W Simple, safe and fast method of plug conversion Approved to BS5733, BS1363-5 plug/socket features and BS1362 fuse link Colour: Black
Antenna holder on mast "L", lenght 35cm, height 60cm, d=42mm + 1x U-Bolt 100mm
Anténní držák na stožár typu "L", 35cm dlouhý, 60cm vysoký s jedním třmenem k uchycení na stožár. Povrch držáku je upraven žárovým zinkem. Jedná se o zakázkovou výrobu. Výroba může trvat až 10dní.
Antenna holder on balcony "L", lenght 35cm, height 20cm, d=42mm with serrated clamp
Díky tomuto držáku můžete namontovat jakoukoliv anténu na balkón. Držák má odsazení 35cm, pracovní výšku 15cm, průměr 42mm a lze jej uchytit na trubku (zábradlí) o průměru 20 až 76mm.