Mounting brackets
TP-Link D-HaloX Wallmount holder for HALO H70X/H80X, white
Plastový držák je určený pro uchycení bezdrátových jednotek HALO H70X a HALO H80X značky MERCUSYS na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 135 x 116 x 40mm.
TP-Link D-EAP2X Holder for EAP devices EAP225, EAP245 and EAP265, white
The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are
D-MT750 Rackmount holder for MikroTik devices RB750Gr3, RB750r2, RB750UPr2 and RB760iGS, gray
The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
D-MTACX Rackmount holder for MikroTik devices hAP AC2/hAP, gray
Plastový držák je určený pro uchycení vybraných MikroTik produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 119 x 33 mm. Kompatibilní se z...
TP-Link D-M9 Wallmount holder for DECO M9, white
The holder is designed for attaching TP-Link Deco M9 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-EAP6X Holder for EAP devices EAP650 and EAP653, grey
Plastový držák/stojan je určený pro uchycení vybraných TP-Link EAP produktů (viz níže) na stůl či zeď . Pro uchycení držáku na zeď jsou v podstavě o rozměrech 83 x 100 mm vytvořeny 3 otvory. Celkové rozměry držáku jsou 106 x 83 x 153 mm. Kompatibilní s...
Ubiquiti UACC-Lite-AP-AM - Wallmount for U6-Lite, UAP-nanoHD and a UAP-AC-Lite
The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws
Ubiquiti UACC-Pro-AP-AM - Wall mount for U6-Pro and UAP-AC-PRO
The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in
TP-Link D-EAPOUT Ceiling bracket for EAP610-Outdoor, grey
Plastový stojan pro TP-Link EAP610-Outdoor venkovní WiFi jednotku. Stojan umožňuje instalace na strop (rozměr podstavce je 83x100mm) nebo na stůl. Patice držáku umožňuje bezproblémové držení EAP jednotky, ať už je držák na stole či na stropě. Rozměry d...
TP-Link D-EAPWALL Holder/stand for EAP235-Wall. EAP615-Wall, grey antracit
Plastový stojan pro TP-Link EAP235-Wall a EAP615-Wall WiFi Access point jednotky. Stojan umožňuje instalace na stůl (rozměr podstavce je 81x120mm). Celkové rozměry stojanového držáku jsou 81 x 120 x 88 mm a je vyroben z šedého PETG fillamentu pomocí 3D...
D-U6-L Wallmount holder for Ubiquiti U6-Lite, UAP-nanoHD and UAP-AC-Lite, white
The plastic holder is used for the horizontal installation of UniFi Access Points from Ubiquiti U6+, U6-Lite, UAP-nanoHD and UAP-AC-Lite on the wall or as a stand on a table. The holder can be installed with the UniFi plate up
D-U6-P Wallmount holder for Ubiquiti U6-PRO and UAP-AC-PRO, white
The plastic holder is used for horizontal installation of UniFi Access Points from Ubiquiti U6-PRO and UAP-AC-PRO on the wall or as a stand on a table. The holder can be installed with the UniFi plate up and down and
TP-Link D-HX220 - Wallmount holder for HX-220/HC-200, white
Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.
TP-Link D-TP226 - Racmount holder for TL-SG108-M2/TL-SX105/ER7206/ER7212PC, gray
Plastový držák je určený pro uchycení vybraných TP-Link produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 226 x 131 x 35mm. Kompatibilní ...
Ubiquiti UACC-CKG2-Plus Stand - Stand for Cloud Key G2 Plus
The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.
TP-Link D-EAPWALL-C Wallmount mounting box for EAP235 and EAP615-Wall, white
The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color
TP-Link D-XE75 Wallmount holder for DECO XE75/XE75 Pro, white
The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible
Ubiquiti UACC-FM - wall mount for UX and UXG-Lite
Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws
Ubiquiti U7 Pro Wall Table Stand
The Ubiquiti U7 Pro Wall Table Stand is an elegant and very light table stand for the Ubiquiti U7 Pro Wall device.
TP-LINK wall mount DECO BE65 white
The holder is designed for attaching TP-Link DECO BE65 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
TP-LINK DIN rail holder for SG108xx/SF1006P/ER605/RP108GE
The holder is designed for attaching TP-Link switches to a DIN rail holder. It is made of PETG material on a 3D printer in a grey anthracite color. Dimensions: 101x25mm Compatible products: SG108xx, SF1006P, ER605, RP1
TP-LINK DIN rail holder for OC200/SF1005xx/SG105xx/SG1005xx
The holder is designed for attaching TP-Link switches to a DIN rail holder. It is made of PETG material on a 3D printer in a grey anthracite color. Dimensions: 98x25mm Compatible products: OC200, SF1005xx, SG105xx, SG1
TP-LINK bracket for Archer NX200 on the wall white
The holder is designed for attaching TP-Link Archer NX200 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
TP-LINK wall mount for HX510 white
The holder is designed for attaching TP-Link HX510 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.
Ubiquiti UACC-AP-AM - Wall mount for Unifi AP
Wall mount for Unifi Access Points. It is made from plastic and weights only 160 grams. Dimensions are 200,5 x 175,1 x 31,2 mm. Compatible devices U7-Pro U7-Pro-Max
Ubiquiti UACC-FM-17cm - wall mount for UCG-Ultra/UCG-Max/UXG-Max
Magnetic wall mount for Cloud Gateway Max, Cloud Gateway Ultra, and Gateway Max.
TP-LINK bracket for DECO BE25 for ceiling and wall mounting, white
Plastic holder manufactured using 3D printing technology with PETG material, designed for mounting the Deco BE25 unit on the wall or ceiling, with three screw holes.
TP-LINK wall mount/stand for cameras TAPO C501GW, white with cable cover
Plastic holder, designed to cover cables and mount the Tapo C501GW camera on the wall using 4 screws (not included in the package). Manufactured using 3D printing with PETG material.
TP-LINK holder/stand for EAP devices EAP6X-UNI anthracite gray
Plastic holder, 3D-printed using PETG material. Compatible with TP-Link EAP access points. 610 613 620 HD 650 653 660 HD 670 670 v2
TP-LINK pole mount/adapter (60-130mm diameter)
Pole adapter with 60-130mm diameter for holders D-TC3x, TC5x, D-VIGIC34x, 4x and 540V-C. The adapter is made of PETG material on a 3D printer in a white colour.
