Powering

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifi

Ubiquiti UACC-PoE+-2.5G is an adapter that can power UniFi PoE+ devices, reduce dependency on PoE switch power, and provide a Multi-Gigabit LAN connection. Delivers up to 30W of PoE+ Surge, peak pulse, and overc

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

High-quality, stabilized white Gigabit PoE power adapter with earthing, LED indication and output voltage 48 V and max. current 0.32 A. The maximum output power is 15,4 W.

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

The Gigabit PoE injector is used to power most RouteBOARDs or Ubiquiti devices supports passive PoE. This type comes with a standard size 2.1/5.5mm power connector. The PoE injector does not work with 802.3af standard and powering devices

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

High-quality, PoE stabilized power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

Internal PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

USW-24-POE is a configurable Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and 2 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options

The Ubiquiti UniFi Switch Flex 2.5G is a compact switch designed to expand networks in home and office environments. It features 8x 2.5Gbit ports, enabling easy integration of devices with higher transfer speeds, such as modern access points, se

The USW-Lite-8-PoE is a fully managed Layer 2 switch with 8 Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide upto a total PoE wattage of 52W for UniFi Access Points or oth

U-POE++ from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 60W, which is sufficient for the energy-intensive devices. The

OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, MikroTik devices with input voltage 48V DC. The power adapter has a maximum power 96W and a maximum output current 2A. A power cord is als

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.3A. The maximum output power is 7W. Suitable for these products LBE-5AC-23 LBE-5AC-Gen2b

High-quality, stabilized PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

The Ubiquiti Switch Flex Mini 2.5G is a compact switch designed to expand network in home and office environments. It offers five 2.5 Gigabit ports that enable easy integration of devices with higher transfer speeds, such as modern access points

Adapter from a two-pole terminal block to standard DC jack with size 2.1/5.5mm. Adapter is suitable for powering analog cameras or other devices without PoE technology. Just bring a two line DC cable and simply connect it to the terminal block m

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

NetPower 16P or CRS318-16P-2S+OUT is an outdoor 16-port Gigabit PoE switch for powering IP cameras, PTP or PTMP Wireless devices with a maximum consumption of 34W/port, total PoE budget 300W, IP55 protection and wall or mast mounting. The

The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen, compact size, and fanless

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 50V and max. current 1.5A. The maximum output power is 80W. It is not backward compatible with 100Mbps devices due to the power supply that runs through

Panel integrating 12 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support.

USW-16-POE is a configurable Gigabit Layer 2 switch with 16 Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and 2 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink opti

The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting The USW-Flex can be installe

Lead-acid battery with 12V and 12Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 96W and a maximum output current 4A