Optical networks

Modern, elegant industrial design, robust construction, and high performance – that’s the Wave-Fiber-ONU, a client unit for GPON solutions. The device functions as a converter from copper to fiber and supports both Bridge and Router modes. It fe

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

Masterlan optic splice tray with cover is suitable for up to 12 splices. Splice trays can be stacked.

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 2 pieces.

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

Optical SC/APC Single-mode 9/125um FAST connector with minimum instrumentation requirements for connector installation - the connector does not need to be polished. An optical fiber cleaver, stripping pliers and optical fiber cleaning sol

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2

The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX standards, the MC220L is designed for use with multi-mode/sing

PLC optical splitters are most important things for building FTTx network with P2MP type (Point to Multi-Point). Our offering splitters have very low loss and high return loss. Compact size provide very easy install to cabinets and optical patch panels

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

Masterlan duplex optic fibre coupler for LC connectors with APC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

FC-SM-100 is 30 meter outdoor single mode optical cable with 6 LC connectors on each side. With this cable you save the cost of renting an optical splicer and related material. The cable is suitable, for example, for galvanic is

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 10/100/1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mod

The FTC is a simple Fiber to Copper converter without management. Unlike many other media converters available on market, it has outdoor waterproof case with lock screw, it's mounting bracket can be attached and locked with a screw from inside the case

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

TP-LINK´s TL-SM321A-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321A-2 uses an integrated LC Bi-Directional optical interface connector and the data link

TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link

Masterlan "@" anchor is built to fully respect the minimum bend radius of the optic fibre cable. Thanks to this, zero attenuation during tension is ensured. The attenuation reaches low values. There is no deformation of the optic fibre cable or

ML-S31D-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

Passive DAC cable for direct connection between two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 30 meters long and is also available in 3m or 0.15m variants. The cable is ideal for creating short connections between switches, rou

TL-SM331T is a universal Gigabit SFP metal module with RJ45 connector for metal cable with a data rate of 10/100/1000 Mbps. The range of the module is up to 100m, it has a durable metal chassis, which helps with good heat dissipation.

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T