PoE injectors

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

High-quality, stabilized PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 50V and max. current 1.5A. The maximum output power is 80W. It is not backward compatible with 100Mbps devices due to the power supply that runs through

High-quality, PoE stabilized power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. Package contains PoE adapter Power cord

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.3A. The maximum output power is 7W. Suitable for these products LBE-5AC-23 LBE-5AC-Gen2b

High-quality, stabilized white Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.32A. The maximum output power is 15,4W.

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication, output voltage 24V and max. current 0.5A in BULK package. The maximum output power is 12W. Package contains PoE adapter Power cord

U-POE++ from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 60W, which is sufficient for the energy-intensive devices. The

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication, output voltage 24V and max. current 1A. The maximum output power is 24W. The power adapter is made in white color. Package contains PoE adapt

PoE injector POE1A2L is used to power WiFi devices via Ethernet cable using so-called passive PoE. This PoE injector has 2.1/5.5mm power connector and two Ethernet ports, of which the port labeled PoE is toward the powered device. Passive PoE is

TL-POE4824G is a passive 48V PoE injector of white color with one output port supporting speed up to 1Gbps, one input LAN and maximum output power 24W. A 3-pin power cable for 230V AC supply is incl

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1.25A. The maximum output power is 30W. This model has power on all 4 pairs. The PoE adapter is only compatible with 1Gbps devices

An AC adapter with integrated PoE, enabling the UniFi Cloud Gateway device to support PoE output on a single port. Adapter is equiped with USB-C 5V/5A output and integrated PoE 48V/0.65A. PoE power is supplied on all pins: 1, 2, 4, 5 (+)

TL-POE4818G is a passive 48V PoE injector of white color with one output port supporting speed up to 1Gbps, one input LAN and maximum output power 18W. A 3-pin power cable for 230V AC supply is incl

Cambium Networks radios utilize PoE (Power over Ethernet) for delivering power and data. This PoE power supply has an AC input and a Data Input which then drives a 30V power plus data( PoE) output to the radio. This PoE power supply meets stringent Lev

Velmi kvalitní, stabilizovaný PoE napájecí adaptér s uzemněním, indikační LED a výstupním napětím 48V a max.proudem 0,32A. Maximální výstupní výkon je 15,4W. Tento model disponuje Gigabitovým ethernetovým portem a je v bílém provedení.

GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. This model has power on all 4 pairs. The PoE adapter is only compatible with 1Gbps devices tha

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

Product designed for mounting PoE sources on a wall. Only for new revisions PoE adapters.

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 50V and max. current 1.2A. The maximum output power is 60W. It is not backward compatible with 100Mbps devices due to the power supply that runs through

High quality stabilized PoE power adapter with grounding, LED indication, 24V output voltage and max. current 1A. The maximum output power is 24W. It is a cheaper alternative to 24V/1A PoE power adapters from Ubiquiti (POE-24-24W).

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

The Gigabit PoE injector is used to power most RouteBOARDs or Ubiquiti devices supports passive PoE. This type comes with a standard size 2.1/5.5mm power connector. The PoE injector does not work with 802.3af standard and powering devices

Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead

High-quality, stabilized PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord