SFP optical modules

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD,

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

XS+85LC01D is a multimode SFP/SFP+SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with a wavelength of 850 nm and two LC connectors for connections up to a distance of 100 m. The mod

XQ+31LC02D is a Singlemode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels, wavelengths 1271nm, 1291nm, 1311nm, 1331nm and two LC connectors for connections up to a distance of 2 km. The module

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 20 pieces.

UF-MM-10G is multimode 10G SFP+ module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 300m. Module is compatible with all Ubiquiti products which contain SFP+ ports. Package contains 20 pieces.

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 2 pieces.

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

The SM6110-SR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-SR high performance 850nm multi-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connections u

The SM6110-LR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-LR high performance 1310 nm single-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connection

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

TP-Link TL-SM7110-SR is a 40Gbps QSFP+ module with an 850nm wavelength, MPO connector, and a maximum distance of up to 150m over OM3 multimode optical fiber. It supports the OMCI protocol and DDM (Digital Diagnostic Monitori

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 10 km. Key Features Data transfer rate up to 10

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 2 km. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Multi-mode and ensures a range of up to 100 m. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

The TL-SM5110-LR is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission both ways) SFP+ transceiver with support for the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a di

The SM5110LSB-10 is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission in both directions) SFP+ transceiver supporting the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a

Teltonika PR4JR20K is a Gigabit cooper RJ45 transceiver. The module has a range of 100m.

Teltonika PR4LC21K is a set of single-mode 1G SFP WDM modules for data transmission using a single fiber with one LC connector. The wavelength (Tx and Rx) of these modules is 1310 and 1550nm, making them suitable for connections up to 20km

Teltonika PR4DU22K is a 1.25G SFP module with an 850nm wavelength, two LC connectors, and a maximum distance of 550m over multimode optical fiber.

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 2 pieces.

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 20 pieces.

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont