Mounting brackets

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

Elegant table stand for a Swiss Army Knife Ultra (UK-Ultra).

Sleek, magnetic wall mount for UniFi Express 7. Package Content Mount

Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r

The Ubiquiti U7 Pro Wall Table Stand is an elegant and very light table stand for the Ubiquiti U7 Pro Wall device.

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.

The OJB-100 is your go-to solution for seamlessly installing Omada and Festa wall plate APs directly onto bare walls. Compatible with models like EAP775-Wall V1.0, EAP725-Wall V1.0, Festa F65-Wall V1.0, EAP655-Wall V1.0 and EAP615-Wall V1.0. Thi

Pole mount that supports up to 4 Ubiquiti Wave AP Micro or Wave AP Gen2 devices. Suitable for poles with a diameter of 25-76mm.

The APM-103 significantly enhances installation flexibility with ±45° vertical and ±45° horizontal adjustments, allowing you to easily position the Omada EAP650 D30-Outdoor and EAP650 D120-Outdoor for optimal performance. This versatile s

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.

The Precision Mounting Bracket is used to mount the cnWave V3000 Client Node on a vertical pole, providing fine adjustment up to 18° in azimuth and +/-30° in elevation for accurate alignment of the V3000. The Precision Bracket is compatible with pole d

Cambium Networks cnWave V5000,V3000 / PMP450i/PTP550(E) Tilt Bracket Assembly. The universal mounting bracket fitting to cnWave V5000,V3000 and PMP450i, PTP550(E) products.

The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.

The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.

The plastic wall mount is designed to mount Halo H50 / H30 / S12 / S3 Mesh Access Points from Mercusys. The holder is made using 3D printing, has a white color and its dimensions are 123 × 40 × 91mm.

The plastic holder is designed to mount the UCK-G2-PLUS from Ubiquiti to 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other.

The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are

The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

Plastový držák je určený pro uchycení vybraných MikroTik produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 119 x 33 mm. Kompatibilní se z...

The holder is designed for attaching TP-Link Deco M9 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.

The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws

The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in

Plastový stojan pro TP-Link EAP610-Outdoor venkovní WiFi jednotku. Stojan umožňuje instalace na strop (rozměr podstavce je 83x100mm) nebo na stůl. Patice držáku umožňuje bezproblémové držení EAP jednotky, ať už je držák na stole či na stropě. Rozměry d...

Plastový stojan pro TP-Link EAP235-Wall a EAP615-Wall WiFi Access point jednotky. Stojan umožňuje instalace na stůl (rozměr podstavce je 81x120mm). Celkové rozměry stojanového držáku jsou 81 x 120 x 88 mm a je vyroben z šedého PETG fillamentu pomocí 3D...

Plastový držák je určený pro uchycení bezdrátových jednotek HALO H70X a HALO H80X značky MERCUSYS na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 135 x 116 x 40mm.

The plastic holder is used for the horizontal installation of UniFi Access Points from Ubiquiti U6+, U6-Lite, UAP-nanoHD and UAP-AC-Lite on the wall or as a stand on a table. The holder can be installed with the UniFi plate up

The plastic holder is used for horizontal installation of UniFi Access Points from Ubiquiti U6-PRO and UAP-AC-PRO on the wall or as a stand on a table. The holder can be installed with the UniFi plate up and down and

Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.