Optical networks

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one SC connector with APC endface polishing. Cable length 1.5 m

Masterlan simplex optic fibre coupler for SC connectors with APC endface polishing, singlemode, without flange. It is used to connect, for example, two optic fibre patch cords.

An integral part of Huawei's all-optical access solution, OptiXstar EG8010Hv6-10 is a bridging-type Optical Network Terminal (ONT) that uses Gigabit Passive Optical Network (GPON) technology to offer ultra-broadband access. With high forw

Masterlan duplex optic fibre coupler for LC connectors with UPC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

Masterlan splice protection 45mm long, 2.2mm diameter and 1mm steel reinforcement to accommodate most optical cassette combs.

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

UF-MM-10G is multimode 10G SFP+ module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 300m. Module is compatible with all Ubiquiti products which contain SFP+ ports. Package contains 2 pieces.

The Huawei OptiXstar EG8145X6-10 is an intelligent GPON and Wi-Fi 6 routing-type ONT. It uses the GPON Wi-Fi 6 technology to implement ultra-broadband access, high performance and wide coverage for users. The high forwarding performance e

Masterlan optic fiber pigtail is suitable for fiber termination in optical distribution frame. Used optic fiber is multimode 50/125 type G.651.1.. Pigtail has one UPC endface polished connector. Cable lenght 1,5 m.

S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM. Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fiber is made from G.657.A2 ty

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan optic splice tray for 12 fibers with the cap. Trays are stackable.

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one SC connector with APC endface polishing. Cable length 3 m.

The Huawei OptiXstar EG8145B7N-50 is a GPON ONT device with support for Wi-Fi 7. It offers: 1x SC/APC uplink connector, 1x 2.5 GE and 3x GE ports, 1x POTS port, and 1x USB port. Support for Wi-Fi 7 (2.4 GHz and 5 GHz with

Masterlan splice protection 60mm long, 2.2mm diameter and 1mm steel reinforcement to accommodate most optical cassette combs.

Masterlan DROPX is fiber optic drop cable suitable for both indoor and outdoor use. Used fibers are high quality Corning (G.657.A2) with perfect flexibility. Aramid yarn serves as strength and protective member. The Cable is completed with LSZH and UV

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.657.A2. The pigtail is equipped with one SC connector with APC endface polishing. Cable length 1.5

Masterlan FBOXSC2 is a very compact optic socket/box on a plaster with a height of only 23mm. It is the ideal product for building FTTH metro networks (Fiber To The Home). Allows ending with SC / LC duplex / E2000 connectors. The socket can b

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switches or

The Huawei OptiXstar EG8041X6-10 is a GPON ONT Gateway with support for Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and a maximum transmission speed of 2402 Mb/s on 5 GHz and 574 Mb/s on 2.4 GHz. The ONT unit is equipped with four LAN

ML-S+31D-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices.

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one connector with UPC endface polishing.

ML-S+85Dout-03 is a multimode 10G SFP+ module with 850nm wavelength, two LC connectors, UPC grinding and is suitable for connection up to a distance of 300m. The module is "cisco compatibile" and is compatible with almos

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX standards, the MC220L is designed for use with multi-mode/sing

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

Modern, elegant industrial design, robust construction, and high performance – that’s the Wave-Fiber-ONU, a client unit for GPON solutions. The device functions as a converter from copper to fiber and supports both Bridge and Router modes. It fe

Masterlan "@" anchor is built to fully respect the minimum bend radius of the optic fibre cable. Thanks to this, zero attenuation during tension is ensured. The attenuation reaches low values. There is no deformation of the optic fibre cable or

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one LC connector with APC endface polishing. Cable length 1.5 m