Optical networks

UF-RJ45-1G is Gigabit SFP metalic module with RJ45 connector for metalic cable wih 10/100/1000Mbps data rate. Range is up to 100m. The module is primarily designed for UniFi switches where you want to increase the number of metallic ports. The module i

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 3 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switches or

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

UACC-OADP-SC-APC-50 optical adapter from Ubiquiti simplex with SC connector on each side with APC polishind type, designed for singlemode cables. It is used for connecting eg two optical patch cables. The package contains 50 pieces of these connectors.

The UFiber WiFi6 GPON CPE (UF WiFi6) is a point-to-multipoint WiFi 6 device that creates high-speed GPON connections capable of reaching a 2.4 Gbps downstream rate and 1.2 Gbps upstream rate. The UF WiFi6 has (4) GbE RJ45 LAN ports and (1) GPON WAN port t

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 3 m but is also available in other variants. The cable is ideal for creating short connections between switche

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

UF-Instant is a GPON SFP module with one SC connector and is designed for Ubiquiti Network EdgeSwitch, EdgeRouter, UniFi Switch and USG series or with UF-AE and F-POE-G2 products. The module will work up to distance 20km and is able to

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 2 pieces.

The UF-SM-PATCH-APC-APC features an SC/APC connector on one end of the cable and a SC/APC connector on the other end to help you build out your GPON network.

Ubiquiti UOC-1 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 1m length and LC-LC duplex connectors.

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 5 m long but is also available in other variants. The cable is

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switche

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Multi-mode and ensures a range of up to 100 m. Key Features Data transfer rate up to 100

UFiber GPON SFP modul with PN: UF-GP-B+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

Ubiquiti UOC-0.5 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 0,5m length and LC-LC duplex connectors.

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The durable outdoor junction box can be installed on a wall or mast and protects UFiber devices (UF-Nano, UF-Loco and UF-AE) from adverse weather conditions, so they can remain functional in all conditions. This rugged enclosure has a screw lock design

UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains

UBNT FiberPOE is low-cost, Gigabit, opto-metalic outdoor Converter, which in addition to transferring data from an optical fiber to a metallic cable can also power via PoE. Compared with the first generation, it can handle a larger larger temper

UF-SPLITTER extends the range of Ubiquiti products for GPON solutions. PLC optical splitters are a key building block for FTTx P2MP (Point to Multi-Point) access networks. The offered splitters have low attenuation and high reflection att

Ubiquiti UACC-OM-SFP10-1450 is single-mode module type CWDM with a transmission speed of up to 10 Gbps, wavelengths of 1450 nm and is compatible with SFP and SFP+ interfaces. The module is equipped with two LC connectors an

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

Modern, elegant industrial design, robust construction, and high performance – that’s the Wave-Fiber-ONU, a client unit for GPON solutions. The device functions as a converter from copper to fiber and supports both Bridge and Router modes. It fe