Optical networks

The UF-SM-PATCH-UPC-APC features an SC/UPC connector on one end of the cable and a SC/APC connector on the other end to help you build out your GPON network.

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 3m or 30m variants. The cable is ideal for creating short connections between switches, routers,

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

Passive DAC cable for direct connection between two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 30 meters long and is also available in 3m or 0.15m variants. The cable is ideal for creating short connections between switches, rou

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 10 km. Key Features Data transfer rate up to 10

The UFiber WiFi6 GPON CPE (UF WiFi6) is a point-to-multipoint WiFi 6 device that creates high-speed GPON connections capable of reaching a 2.4 Gbps downstream rate and 1.2 Gbps upstream rate. The UF WiFi6 has (4) GbE RJ45 LAN ports and (1) GPON WAN port t

Ubiquiti UOC-1 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 1m length and LC-LC duplex connectors.

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 2 pieces.

UFiber Active Ethernet allows for easy media conversion from fiber to copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af and is compatible with all UFibe

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 3 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

Modern, elegant industrial design, robust construction, and high performance – that’s the Wave-Fiber-ONU, a client unit for GPON solutions. The device functions as a converter from copper to fiber and supports both Bridge and Router modes. It fe

Ubiquiti UOC-0.5 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 0,5m length and LC-LC duplex connectors.

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 20 pieces.

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 2 pieces.

FC-SM-300 is 90 meter outdoor single mode optical cable with 6 LC connectors on each side. With this cable you save the cost of renting an optical splicer and related material. The cable is suitable, for example, for galvanic is

UF-RJ45-1G is Gigabit SFP metalic module with RJ45 connector for metalic cable wih 10/100/1000Mbps data rate. Range is up to 100m. The module is primarily designed for UniFi switches where you want to increase the number of metallic ports. The module i

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 0.3m, 3m or 30m variants. The cable is ideal for creating short connections between switches, ro

UFiber GPON SFP modul with PN: UF-GP-C+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

UBNT FiberPOE is low-cost, Gigabit, opto-metalic outdoor Converter, which in addition to transferring data from an optical fiber to a metallic cable can also power via PoE. Compared with the first generation, it can handle a larger larger temper

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switc

UF-MM-10G is multimode 10G SFP+ module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 300m. Module is compatible with all Ubiquiti products which contain SFP+ ports. Package contains 2 pieces.

FC-SM-200 is 60 meter outdoor single mode optical cable with 6 LC connectors on each side. With this cable you save the cost of renting an optical splicer and related material. The cable is suitable, for example, for galvanic is

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 10 m long but is also available in other variants. The cable is

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 20 m long but is also available in other variants. The cable is

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 30 m long but is also available in other variants. The cable is