Mounting brackets

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.

U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD

The OJB-100 is your go-to solution for seamlessly installing Omada and Festa wall plate APs directly onto bare walls. Compatible with models like EAP775-Wall V1.0, EAP725-Wall V1.0, Festa F65-Wall V1.0, EAP655-Wall V1.0 and EAP615-Wall V1.0. Thi

Wall mount for Unifi Access Points. It is made from plastic and weights only 160 grams. Dimensions are 200,5 x 175,1 x 31,2 mm. Compatible devices U7-Pro U7-Pro-Max

The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in

Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws

The Precision Mounting Bracket is used to mount the cnWave V3000 Client Node on a vertical pole, providing fine adjustment up to 18° in azimuth and +/-30° in elevation for accurate alignment of the V3000. The Precision Bracket is compatible with pole d

Excellent plastic holder designed to places where it is not possible to drill through the suction cup so it can be mounted on the window. The holder can be locked in all directions.

The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws

The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.

Cambium Networks cnWave V5000,V3000 / PMP450i/PTP550(E) Tilt Bracket Assembly. The universal mounting bracket fitting to cnWave V5000,V3000 and PMP450i, PTP550(E) products.

Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r

The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.

The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.

Plastic holder, 3D-printed using PETG material. Compatible with TP-Link EAP access points. 610 613 620 HD 650 653 660 HD 670 670 v2

Pole adapter with 60-130mm diameter for holders D-TC3x, TC5x, D-VIGIC34x, 4x and 540V-C. The adapter is made of PETG material on a 3D printer in a white colour.

Side strut for UltraDish 29WB is engineered for strength and durability, this Side Strut is made from lightweight aluminum with corrosion-resistant stainless steel hardware. Designed to enhance the stability and performance of your UltraDish™ 29 WB Ant

The holder is designed for mounting TP-Link wireless units EAP115/230/650-Wall and smart switches Tapo S210/S220 on a wall. The holder is made of PETG material using a 3D printer and comes in white color.

The plastic holder with a built-in box is intended for attaching TP-Link cameras VIGI C400, C420, C430 and C450 to the wall using two screws. The holder can be installed above and below the camera and its base fits exactly on the socket i

Magnetic wall mount for Cloud Gateway Max, Cloud Gateway Ultra, and Gateway Max.

Plastic holder manufactured using 3D printing technology with PETG material, designed for mounting the Deco BE25 unit on the wall or ceiling, with three screw holes.

Plastic holder, designed to cover cables and mount the Tapo C501GW camera on the wall using 4 screws (not included in the package). Manufactured using 3D printing with PETG material.

The APM-103 significantly enhances installation flexibility with ±45° vertical and ±45° horizontal adjustments, allowing you to easily position the Omada EAP650 D30-Outdoor and EAP650 D120-Outdoor for optimal performance. This versatile s

Sleek, magnetic wall mount for UniFi Express 7. Package Content Mount

Elegantní stojánek na stůl pro Swiss Army Knife Ultra.

Pole mount that supports up to 4 Ubiquiti Wave AP Micro or Wave AP Gen2 devices. Suitable for poles with a diameter of 25-76mm.

The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color

The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible