Active PoE

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SG3424P, TL-SF1008P or TL-POE150S, or other equivalent pro

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your netw

Outdoor PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

USB converter serve to powering any device by USB port. Its converting 802.3af PoE to 5V/2A with 10W maximum load. Example of installation Important note: converter does not convert data from Ethernet to USB, but only power

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga

The GPeR unit allows to extend Ethernet cable by additional hop (

MaxLink PI30F is a high-quality Gigabit POE injector with a single POE port, LAN port and one SFP port for powering 802.3af/at devices with maximum power consumption up to 30W. For better distribution of current load, power is applied to

MaxLink PI90 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 95W. For better distribution of the current load, all 4 pairs of conductors are powered. Can als

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

MaxLink MAXPIDIN30 is an active PoE injector with DIN rail mounting with input DC power supply 12 to 48V. The output of this power source is a Gigabit port with 802.3af/at PoE (55V) designed for WiFi, VoIP or wireless links. PoE is distri

MaxLink MAXPIDIN60 is an active DIN rail mounting PoE injector with DC power input from 12 to 48 V and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V) which is dedicated for Wi

MaxLink MAXPIDIN30-240 is an active DIN rail mounting PoE injector with DC power input from 44 to 57 V or 100-240 VAC and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V)

MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp

TL-POE160S is a very robust Gigabit power PoE injector that supports 802.3af/at standards with power up to 30W, which is a suitable solution for powering most IP cameras, VoIP, WiFi AP and other devices. The injector has an LED indication

Cambium Networks - 10GbE PoE injector C000000L141A is a high-quality 10GbE PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 60W, which is sufficient for the devices such

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

With this adapter, you can power Raspberry PI (all models), other single-board computers, and other devices powered by the Micro USB connector. This allows you to use these devices very flexibly and we don't need a power outlet or AC adapter. T

Cambium Network - Gigabit Poe injector N000900L017B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 15W, which is sufficient for the devices such as cnPilot

Cambium Networks - Gigabit Poe injector N000000L034B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 30W, which is sufficient for the devices such as: e6

S tímto adaptérem můžete napájet Raspberry PI i jiné jednodeskové počítače a další zařízení s napájením přes USB type C konektor. Díky tomu můžete tato zařízení velmi flexibilně použít a nepotřebujeme žádnou zásuvku ani síťový adaptér. Tímto adaptérem ...

The Long-range Indoor/Outdoor Repeater (UACC LRE) is Gigabit adapter that allows you to easily and inexpensively expand your Ethernet network's range. With its (2) GbE RJ45 ports, the UACC LRE can receive 802.3af/at PoE/PoE+ while providing passthrough

TL-POE170S is a very robust Gigabit power PoE injector that supports 802.3af/at/bt standards with a power of up to 60 W, which is a suitable solution for PTZ power supply cameras, LED panels, more powerful Wi-Fi APs and other devices. The

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

Internal cable reduction from Ethernet to USB-C port, which is used for power supply and data transfer and is intended only for the following products from Ubiquiti:

Cable extender equipped with TransPort connectors is intended for coupling UISP TransPort cables in outdoor. Mounting is possible to the mast / pole with diameter 35mm - 60mm.

MaxLink PI30 is Gigabit PoE injector of white color with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. Po