Accessories

The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.

WiFiMan Wizard is a portable spectral analyzer designed for the WiFiMan iOS and Android mobile application with which it communicates wirelessly via Bluetooth. Together with a Lidar-equipped smartphone, it is able to project t

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.

The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The MOX PoE add-on can be used to provide power to the Turris MOX router over ethernet without having to use a separate power cable. It connects to the MOX A (Basic) module which is part of all MOX configurations. It is compliant with IEEE standards 80

The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are

The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible

Plastový držák je určený pro uchycení bezdrátových jednotek HALO H70X a HALO H80X značky MERCUSYS na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 135 x 116 x 40mm.

The plastic holder is used for the horizontal installation of UniFi Access Points from Ubiquiti U6+, U6-Lite, UAP-nanoHD and UAP-AC-Lite on the wall or as a stand on a table. The holder can be installed with the UniFi plate up

Set of 3 rectangular covers with black theme is designed to change from the traditional white look and is compatible with UAP-beaconHD devices and U6-Extender. For demanding customers there is a tot

Set of 3 rectangular covers with concrete theme is designed to change from the traditional white look and is compatible with UAP-beaconHD devices and U6-Extender. For demanding customers there is a

Set of 3 rectangular covers with wooden theme is designed to change from the traditional white look and is compatible with UAP-beaconHD devices and U6-Extender. For demanding customers there is a to

The plastic holder is used for horizontal installation of UniFi Access Points from Ubiquiti U6-PRO and UAP-AC-PRO on the wall or as a stand on a table. The holder can be installed with the UniFi plate up and down and

Wireless set of two adhesive antennas with pigtails terminated with u.Fl connectors and Dual Band WiFi 6 cards with Mediatek MT7915DAN chipset, miniPCI-e bus with 2x u.Fl connectors, supporting WPA2 encryption, modulation speed

Wireless set of two pigtails terminated with u.Fl connectors, omnidirectional antennas, upper part of aluminum chassis in silver color on Turris Omnii and Dual Band WiFi 6 cards marked AW7915-NP1, miniPCI-e bus with 4× u.Fl connectors

Product condition: Used piece for exhibition purposes. Fully functional. Mast holder without tilt, mast diameter 25 - 77 mm, for Cambium's cnWave V5000 units

Propojovací kablík je primárně určen pro wi-fi moduly Turris Omnia k propojení s diplexerem a externí anténou. Lze však použít i s jinými zařízeními, které pracují na max frekvenci 6 GHz; VF kabelová redukce (pigtail) řady U.FL(f) s kabelem RF1.13/0.81...

Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.

Plastový držák je určený pro uchycení vybraných TP-Link produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 226 x 131 x 35mm. Kompatibilní ...

The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.

The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color

IW-HD-BK is a cover for Ubiquiti UAP In-Wall HD with a black theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-CF je kryt k Ubiquiti UAP In-Wall HD s maskovaným motivem. Pro náročné zákazníky je na výběr celkem z 5ti volitelných motivů krytů. Na četné žádosti zákazníku jsme se rozhodli kryty prodávat také po jednotlivých kusech, balení produktu tak není v...

IW-HD-CT is a cover for Ubiquiti UAP In-Wall HD with a concrete theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-MB is a cover for Ubiquiti UAP In-Wall HD with a marble theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-WD is a cover for Ubiquiti UAP In-Wall HD with a wooden theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

nHD-cover-Black is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Black design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not offici

nHD-cover-Camo-3 is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Camo design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not offici

nHD-cover-Concrete is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Concrete design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not