Pasive PoE

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

PoE injector POE1A2L is used to power WiFi devices via Ethernet cable using so-called passive PoE. This PoE injector has 2.1/5.5mm power connector and two Ethernet ports, of which the port labeled PoE is toward the powered device. Passive PoE is

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. Package contains (5) PoE adapter (5) Power cord

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication, output voltage 24V and max. current 1A. The maximum output power is 24W. The power adapter is made in white color. Package contains PoE adapt

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 50V and max. current 1.2A. The maximum output power is 60W. It is not backward compatible with 100Mbps devices due to the power supply that runs through

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

POE-BOX8-G is a passive Gigabit PoE injector suitable for powering up to 8 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For poweri

High-quality, PoE stabilized power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

The SP-POE12 splitter is designed to power IP cameras that require a 12V DC power supply. It is built using a high-efficiency voltage converter that steps down voltage from 44–57V DC to 12V DC PoE supports 802.3af/at specification. Pins 1/2 (

The Mikrotik GPER14i is a manageable outdoor PoE extender, perfect for extending power to your outdoor devices such as Wi-Fi access points and IP cameras. It features 4x Gigabit LAN ports, with 1 port supporting PoE-IN (802.3bt, 90W) and

Ubiquiti UACC-PoE++-10G is an adapter that can power UniFi PoE++ devices, reduce dependency on PoE switch power, and provide a Multi-Gigabit LAN connection. Delivers up to 60W of PoE++ Surge, peak pulse, and ove

The Ubiquiti POE-24 is a grounded PoE injector with a maximum output power of 30 W. It provides one input port for a traditional LAN connection and a second port as a PoE output port. The maximum data transfer rate is 1 Gbps. This device

High-quality, stabilized white Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.32A. The maximum output power is 15,4W.

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

The GPeR unit allows to extend Ethernet cable by additional hop (

TL-POE4824G is a passive 48V PoE injector of white color with one output port supporting speed up to 1Gbps, one input LAN and maximum output power 24W. A 3-pin power cable for 230V AC supply is incl

Bezdrátové zařízení Cambium Networks využívají PoE (Power over Ethernet) pro dodávání energie a dat. Tento PoE napájecí zdroj má AC a datový vstup, který pak napájí 30V bezdrátovou jednotku. Napájecí zdroj PoE splňuje přísné požadavky na účinnost a pře...

The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: Interface mana

High quality PoE adapter with grounding, LED indication, output voltage 24 V and max. current 0.5 A. Maximum output power is 12 W. This is a Gigabit version with power supply for all 4 pairs. It is not backward compatibl

Panel integrating 24 passive PoE injectors into a single 19"/1U panel suitable for powering up to sixteen devices. Professional solution for remote powering of many active elements with passive PoE support. Important features

POE-BOX4 is a passive PoE injector suitable for powering up to 4 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For powering PoE injector u

HS12-2400 is a passive, Gigabit, stabilized PoE adapter with LED indication, 24V output power and max. current 0.5A. The maximum output is 12W. The voltage is on these pins: 4.5 (+), 7.8 (-). A 2-pin power cable is included in t

HS24-4800 is a passive, Gigabit, stabilized PoE adapter with LED indication, 48V output power and max. current 0.5A. The maximum output is 24W. The voltage is on these pins: 4.5 (+), 7.8 (-). A 2-pin power cable is included in t

NU24-F240100-I2 is a high-quality stabilized Gigabit PoE power adapter / injector with ground, LED indication, 24V output voltage and 1A max. current. The maximum output power is 24W. Compared to standard injectors, it powering over all 8 wire (4 pairs

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains (5) Gigabit PoE adapter (5) Power co

The Gigabit PoE injector is used to power most RouteBOARDs or Ubiquiti devices supports passive PoE. This type comes with a standard size 2.1/5.5mm power connector. The PoE injector does not work with 802.3af standard and powering devices

Panel integrating 6 passive Gigabit PoE injectors into a single panel. Professional solution for remote power supply of a large number of active elements with support for passive PoE. By adding this walk-through panel, you get a pow

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. Package contains PoE adapter Power cord