SFP+ optical modules

ML-S+3327-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

The TL-SM5110-LR is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-LR high performance 1310nm single-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 10 km with

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

ML-S+31Dout-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices. The advantage of this pro

Ubiquiti UACC-OM-SFP10-1450 is single-mode module type CWDM with a transmission speed of up to 10 Gbps, wavelengths of 1450 nm and is compatible with SFP and SFP+ interfaces. The module is equipped with two LC connectors an

ML-S+31D-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices.

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 2 pieces.

ML-S+2733-20 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 20km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

ML-S+3327-20 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 20km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device that has SFP+ ports can now

RTROM01-RTSF-10G is a 10-Gigabit SFP+ metal module with RJ45 connector for a metal cable with a data rate of 1G / 2.5G / 5G / 10 Gbps. The range of the module is 100 m at 1 Gbps, it is only 30 m at 10 Gbps using a Cat 6A cable. The mo

The TL-SM5110-LR is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission both ways) SFP+ transceiver with support for the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a di

The SM5110LSB-10 is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission in both directions) SFP+ transceiver supporting the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a

ML-S+31D-40 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 40km. Module is "cisco compatible", so it is compatible with almost all active devices.

ML-S+31Dout-40 is a singlemode 10G SFP+ module with a wavelength of 1310 nm and two LC connectors for connections up to 40 km. Module is "cisco compatible" and is compatible with almost all active devices. The LC connecto

ML-S+85Dout-03 is a multimode 10G SFP+ module with 850nm wavelength, two LC connectors, UPC grinding and is suitable for connection up to a distance of 300m. The module is "cisco compatibile" and is compatible with almos

The Ubiquiti UACC-OM-SM-10G-S-20 is an SFP+ data transmission module using single-mode optical fiber. The data transfer rate is 10 Gbps, the maximum power consumption is 1 W, and the transmission range reaches 10 km. SFP+ module

Huawei OSX040N01 is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 40km. The LC connectors in the SFP module have UPC polishing.

Huawei SFP-10G-USR is a multimode 10G SFP+ module with a wavelength of 850nm, two LC connectors, PC/UPC polishing, designed for ultra short distances. The module is suitable for connections up to 150m when using OM4 c

Huawei SFP-10G-ZR is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 80km. The LC connectors in the SFP module have UPC polishing.

Huawei SFP-10G-iLR is a single-mode 10G SFP+ module with a wavelength of 1310 nm and two LC connectors for connection over distances of up to 1.4 km. 10GBASE-iLR is not a defined standard; it is based on the 10GBASE-LR standard. The LC connec

The Huawei OMXD30000 is a multi-mode 10G SFP+ module with a wavelength of 850nm and two LC connectors for connections up to 0,3km. The LC connectors in the SFP module have UPC polishing.

The Huawei OSX010000 is a single-mode 10G SFP+ module with a wavelength of 1310nm and two LC connectors for connections up to 10km. The LC connectors in the SFP module have UPC polishing.

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

10G singlemode optical CWDM module with a wavelength of 1270nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

10G singlemode optical CWDM module with a wavelength of 1310nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features