Accessories

LTE antenna with 2.5dBi gain and two 3m cables terminated with SMA Male connectors for 698-960 MHz and 1710-2690 MHz bands. The antenna is suitable not only for all Teltonika routers that are equipped with SMA connectors for connecting an exter

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

Mobile magnetic SMA Antenna for the bands of 699-868MHz, 1850-2690MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB1

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

DIN Rail adapter PR5MEC00 Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

Mobile adhesive SMA Antenna for the bands of 824-960/1710-2170 MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TR

Use the PR5MEC22 Surface Clip Holder Kit to provide a stable and secure base for your Teltonika router (RUT200, RUT240, RUT241, RUT260, TRB245, TRB246, TRB255 and TRB256). This holder kit comes with a high-quality surface clip that

Outdoor LTE/Wi-Fi antenna for RUT2xx series routers. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from every dir

Power supply 12V, 20W, mounted directly on the DIN rail. Input voltage 100-240 VAC 50/60 Hz

WiFi magnetic RP-SMA Antenna for the frequency of 2.4-2.4835 GHz and 2 dBi gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955.

Teltonika PR5MEC25 TSW2 Rear panel with DIN Rail holder is suitable for TSW200 and TSW210. Technical data Mounting type: 35 mm DIN Rai

Teltonika PR5MEC26 Rack mounting KIT is produced for one product - Teltonika RUTXR1. Technical data Mounting type: 1U Rack mounting Material: Copper - Nickel Silver Alloy C7521

Teltonika PR3PREU6 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . Technical data Input

Teltonika PR318EUA is power supply with power of 130 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data

AUTOMOTIVE POWER SUPPLY, 9-30VDC, 2A, dedicated for Teltonika products (RUT 230/240/850/900/950/955, RUTX08/09/10/11/, TRB140/141/142/145)

Outdoor LTE/Wi-Fi/GPS antenna for RUT9-series routers. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from every d

Teltonika Bat120 is a small UPS that only works with DC voltage and hides a small 2300 mAh battery (17 Wh) for bridging short outages for Teltonika Facility with 4-pin connector. On the one hand, the input and output

Teltonika PR5MEC24 TSW1 Rear panel with DIN Rail holder. This panel is compatible with Teltonika TSW100 and TSW101. Technical Data Mounting type: 35 mm DIN rail Dimensions:

Outdoor LTE/Wi-Fi/GPS/Bluetooth antenna for RUTX11 router. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from eve

Single port Gigabit PoE injector for powering devices. Key features Input frequency - 50 / 60 Hz Input current - 0.5 A PoE output voltage - 52 VDC PoE method - Active

Passive PoE injector (24W) for powering devices. Key features Input frequency - 50 / 60 Hz Input current - 0.8 A PoE output voltage - 24 VDC PoE method - Passive

The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise

Mobile SMA Antenna for the bands of 698-960/1710-2690 MHz and 3 dBi max. gain, type of mounting - screw on. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Compact plastic DIN Rail adapter (70x25x14,5mm) PR5MEC11, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Surface mounting kit PR5MEC12, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Combo antenna with a total of five 3m cables, terminated with 3x SMA Male and 2x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated with

Combo antenna with a total of three 3m cables, terminated with 2x SMA Male and 1x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated wit

Beacon with battery life reaching up to 18 years, identifies and tracks industrial equipment within a radius of 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Beacon with battery life reaching up to 5 years, identifies and tracks industrial equipment within a radius of 200 meters. To be used with: RUTX11, RUTX12, RUTX10.