SFP+ optical modules

UF-MM-10G is multimode 10G SFP+ module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 300m. Module is compatible with all Ubiquiti products which contain SFP+ ports. Package contains 2 pieces.

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 2 pieces.

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

ML-S+85D-03 is multimode 10G SFP+ module with 850nm wave length and 2 LC connectors for link at distance up to 300m. Module is "cisco compatible", so it is compatible with almost all active devices.

ML-S+31D-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices.

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

ML-S+3327-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

The TL-SM5110-LR is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-LR high performance 1310nm single-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 10 km with

ML-S+3327-20 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 20km. It uses 1 optical fiber, Tx/Rx wave length is 1330/1270nm. Module is "cisco compatible", so it is compatible with almost all active dev

This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device that has SFP+ ports can now

ML-S+2733-20 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 20km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

ML-S+31Dout-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices. The advantage of this pro

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

10G singlemode optical CWDM module with a wavelength of 1310nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

10G singlemode optical CWDM module with a wavelength of 1270nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

ML-S+85Dout-03 is a multimode 10G SFP+ module with 850nm wavelength, two LC connectors, UPC grinding and is suitable for connection up to a distance of 300m. The module is "cisco compatibile" and is compatible with almos

10G singlemode optical CWDM module with a wavelength of 1290nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

ML-S+31D-40 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 40km. Module is "cisco compatible", so it is compatible with almost all active devices.

RTROM01-RTSF-10G is a 10-Gigabit SFP+ metal module with RJ45 connector for a metal cable with a data rate of 1G / 2.5G / 5G / 10 Gbps. The range of the module is 100 m at 1 Gbps, it is only 30 m at 10 Gbps using a Cat 6A cable. The mo

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 20 pieces.

UF-MM-10G is multimode 10G SFP+ module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 300m. Module is compatible with all Ubiquiti products which contain SFP+ ports. Package contains 20 pieces.

The TL-SM5110-SR is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-SR high performance 850nm multi-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 300m (OM3)

ML-S+31Dout-40 is a singlemode 10G SFP+ module with a wavelength of 1310 nm and two LC connectors for connections up to 40 km. Module is "cisco compatible" and is compatible with almost all active devices. The LC connecto

Ubiquiti UACC-OM-SFP10-1450 is single-mode module type CWDM with a transmission speed of up to 10 Gbps, wavelengths of 1450 nm and is compatible with SFP and SFP+ interfaces. The module is equipped with two LC connectors an

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

The TL-SM5110-LR is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission both ways) SFP+ transceiver with support for the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a di

The SM5110LSB-10 is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission in both directions) SFP+ transceiver supporting the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a

The Ubiquiti UACC-OM-SM-10G-S-20 is an SFP+ data transmission module using single-mode optical fiber. The data transfer rate is 10 Gbps, the maximum power consumption is 1 W, and the transmission range reaches 10 km. SFP+ module