Power adapters

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 96W and a maximum output current 4A

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum power 60W and a maximum output current 5A

Original Ubiquiti transport power adapter UACC-Adapter-PT-120W with EU socket plug, atypical 2-pin PowerTransport connector designed to power specific Ubiquiti devices (UISP Box, UISP Power, UISP Router and UISP Switch) with output vo

A 9V power adapter suitable especially for powering some routers and switches with a standard 5.5/2.1mm DC connector. The maximum current drawn is 0.5A.

A 12V power adapter suitable especially for powering some routers and switches with a standard 5.5/2.1mm DC connector. The maximum current drawn is 1A.

A 5V power adapter suitable especially for powering some routers and switches with a standard 5.5/2.1mm DC connector. The maximum current drawn is 0.8A.

A 5V power adapter suitable especially for powering some routers and switches with a standard 5.5/2.1mm DC connector. The maximum current drawn is 0.6A.

A 9V power adapter suitable especially for powering some routers and switches with a standard 5.5/2.1mm DC connector. The maximum current drawn is 0.5A.

The Huawei DC power adapter with 12V output voltage and max current of 2A. The power adapter has a maximum output power of 24W. The adapter is equipped with a standard 5.5 / 2.1mm connector on the output.

Napájecí adaptér s přímou instalací do zásuvky se standardním 5.5 / 2.1mm konektorem určeným pro napájení zařízení se vstupním napětím 24V DC . Napájecí adaptér má maximální výkon 12W a max. výstupní proud je 0,5A .

The Ubiquiti UACC-Adapter-AC-210W is a power adapter for connection to a 230V electrical network, designed not only for powering UniFi PoE switches but also other devices requiring an input voltage of 54V DC with a power output of

Teltonika PR3PWEU3 is power supply with power of 62,4 W. This power supply could be used with Teltonika devices: TSW100 and RUT951 PoE+. Technical data Input frequency: 50 / 60 Hz Input current: 1,5 A

Teltonika PR3PUUS3 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT200/240/241/260/271/300/301/901/906/950/951/955/956/976, TRB140/141/142/145/160/500, TRM500 and TSW110. The power adapter has a maximum power o

Teltonika PR315PS3 is an universal power adapter with atypical 4-pin connector designed for Teltonika units. The power adapter has a maximum power of 24W, an output voltage of 24V and a current of 1A.

Power 9V adapter suitable especially for powering some routers and switches with a standard DC connector 5.5 / 2.1mm. The maximum current consumption is 0.85A.

Power 5V adapter suitable especially for powering some routers and switches with DC connector 3.5 / 1.35 mm. The maximum current consumption is 0.6A.

Power 12V adapter suitable especially for powering some routers and switches with a standard DC connector 5.5 / 2.1mm. The maximum current consumption is 1 A.

Power 12V adapter suitable especially for powering some routers and switches with a standard DC connector 5.5 / 2.1mm. The maximum current consumption is 1.5A.

MikroTik OEM power adapter with direct installation in a socket with a standard 4 / 1.7mm connector and output voltage 5V DC. The power adapter has a maximum power 15W and a maximum output current 3A.

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 19W and

Protec power adapter with splash-proof outer case. It is designed for wall mounting installation with IP53 protection and recommended installation under the roof. The 230V input terminal block and DC output connector are located inside th

OEM napájecí zdroj 12V, 1,5A, 18W

OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example LED strip or MikroTik devices with input voltage 12V DC. The power adapter has a maximum power 6W and a

OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 9W and a maximum out

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum power 36W and a maximum output current 3A

Power 9V adapter suitable especially for powering some routers and switches with a standard DC connector 5.5 / 2.1mm. The maximum current consumption is 0.6A.

24HPOW is a power adapter with a maximum output voltage of 24V, a current of max. 2.5A and a total power of 60W. The power adapter has a standard 2.1 / 5.5mm connector. The package includes a power cord.

Original MikroTik power adapter 48POW with EU plug for plugging into a socket, with a standard 5.5 / 2.1mm connector intended for powering, for example, MikroTik devices with input voltage 48V DC. The power adapter h

48V 2A 96W power supply, to be used with MikroTik products that support 48V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48V 1.46A 70W), allowing more power per port. Co

MikroTik power adapter with 5V voltage, maximum current 1A, max. Power 5W and microUSB connector. This power source is suitable, for example, for MikroTik hAP mini, hAP lite and cAP lite.