SFP optical modules
MikroTik SFP module S-85DLC05D, MM, 550m, 1.25G, 850nm
S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD,
MaxLink SFP+ 1/2.5/5/10G copper module, RJ-45, 30m, 10Gbps
ML-SFP-RJ45-10G is a 10 Gbps SFP+ metalic module with an RJ45 connector for metalic cable. This is a Cisco compatible module. The module has range up to 100m.
Ubiquiti UACC-OM-MM-1G-D-20 (UF-MM-1G-20) - U Fiber, Multi-Mode Module, 1G, 20-Pack
UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 20 pieces.
Ubiquiti UACC-OM-SM-1G-S-2 (UF-SM-1G-S) - U Fiber, Single-Mode Module, 1G, BiDi, 2-Pack
UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains
Ubiquiti UACC-OM-SM-1G-S-20 (UF-SM-1G-S-20) - U Fiber, Single-Mode Module, 1G, BiDi, 20-Pack
UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains
MaxLink 1.25G SFP optical module, SM, 1310nm, 3km, 2x LC connector, DDM
ML-S31D-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.
MaxLink 1.25G SFP optical module, SM, 1310nm, 40km, 2x LC konektor, DDM
ML-S31D-40 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 40km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.
MaxLink SFP 10/100/1000M copper module, RJ-45, 100m, 1Gbps
ML-SFP-RJ45-1G is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Maximum distance range is 100m.
Ubiquiti UACC-CM-RJ45-1G (UF-RJ45-1G), 1G Copper Module
UF-RJ45-1G is Gigabit SFP metalic module with RJ45 connector for metalic cable wih 10/100/1000Mbps data rate. Range is up to 100m. The module is primarily designed for UniFi switches where you want to increase the number of metallic ports. The module i
MaxLink 1.25G SFP optical module, WDM(BiDi), SM, Tx 1550/Rx1310nm, 20km, 1x SC connector, DDM
WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products
MaxLink 1.25G SFP optical module, WDM(BiDi), SM, Tx 1310/Rx1550nm, 20KM, 1x SC connector, DDM
WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products
MikroTik 1.25G SFP optical module S-C53DLC40D, CWDM, SM, 40km, 1530nm, 2x LC
S-C53DLC40D is a singlemode 1.25G SFP CWDM module with a 1530nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov
MikroTik 1.25G SFP optical module S-C57DLC40D, CWDM, SM, 40km, 1570nm, 2x LC
S-C57DLC40D is a singlemode 1.25G SFP CWDM module with a 1570nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov
MikroTik 1.25G SFP optical module S-C59DLC40D, CWDM, SM, 40km, 1590nm, 2x LC
S-C59DLC40D is a singlemode 1.25G SFP CWDM module with a 1590nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov
MikroTik 1.25G SFP optical module S-C61DLC40D, CWDM, SM, 40km, 1610nm, 2x LC
S-C61DLC40D is a singlemode 1.25G SFP CWDM module with a 1610nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov
MikroTik SFP module S-45/54LC80D, SM, 80km, 1.25G (one pair)
The S-4554LC80D is sold as a kit of two single mode WDM modules with Gigabit speed, one LC connector on each side and maximum distance up to 80km. The wavelengths of the modules are 1490 / 1550nm and 1550 / 1490nm.
MikroTik SFP module S-55DLC80D, SM, 80km, 1.25G, 1550nm, 2x LC
The S-55DLC80D is a singlemode Gigabit SFP module with a 1550nm wavelength, two LC connectors and maximum distance up to 80km. The module iscompatible with all MikroTik products, that have SFP or SFP+ cages and other cisco compliant devices.
MaxLink 1.25G SFP optical HP module, SM, 1310nm, 20km, 2x LC connector, DDM, HP comp.
ML-S31D-20-HP is 1.25G SFP module with wavelength of 1310nm and 2 LC connectors for max. length of 20km - singlemode optic fiber. SFP module supports DDM. LC connectors in SFP has grinding of ferule type UPC. HPE compatibility
MaxLink 1.25G SFP optical HP module, WDM(BiDi), SM, Tx 1550/Rx1310nm, 20km, 1x LC connector, DDM, HP comp.
WDM SFP modules use only one optical fiber for bidirectional linking, allowing you to double the link density without replacing the optical path. SFP module supports monitoring - DDM function. LC connectors in SFP module have UPC type grinding.
MaxLink 1.25G SFP optical HP module, WDM(BiDi), SM, Tx 1310/Rx1550nm, 20KM, 1x LC connector, DDM, HP comp.
WDM SFP modules use only one optical fiber for bidirectional linking, allowing you to double the link density without replacing the optical path. SFP module supports monitoring - DDM function. LC connectors in SFP module have UPC type grinding.
MaxLink 1.25G SFP optical module, WDM(BiDi), SM, Tx 1550/Rx1310nm, 3km, 1x LC connector, DDM
WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi
MaxLink 1.25G SFP optical module, WDM(BiDi), SM, Tx 1310/Rx1550nm, 3km, 1x LC konektor, DDM
WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi
MaxLink 1.25G SFP optical module, WDM(BiDi), SM, Tx 1550/Rx1310nm, 3km, 1x SC connector, DDM
WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi
MaxLink 1.25G SFP optical HP module, SM, 1310nm, 3km, 2x LC connector, DDM, HP comp.
ML-S31D-3-HP is 1.25G SFP module with wavelength of 1310nm and 2 LC connectors for max. length of 3km - singlemode optic fiber. SFP module supports DDM. LC connectors in SFP has grinding of ferule type UPC. HPE compatibility
MaxLink 1.25G SFP optical module, WDM(BiDi), SM, Tx 1310/Rx1550nm, 3KM, 1x SC connector, DDM
WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi
TP-Link TL-SM321A-2 - Gigabit SFP module, WDM, SM, 2km, 1550/1310nm
TP-LINK´s TL-SM321A-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321A-2 uses an integrated LC Bi-Directional optical interface connector and the data link
TP-Link TL-SM321B-2 - Gigabit SFP module, WDM, SM, 2km, 1310/1550nm
TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link
Hikvision HK-SFP-1.25G-1310-DF-MM SFP module, MM, 1310nm, 1km, 2x LC
HK-SFP-1.25G-1310-DF-MM je Multi Mode SFP modul značky Hikvision s maximální propustností 1Gbps, podporující s vlnovou délkou 1310nm pro Tx i Rx a dvěma LC konektory pro spojení až na vzdálenost 1km a to pomocí kabelů 62,5/125um a 50/125um.
TP-Link TL-SM331T, 1G ethernet SFP module
TL-SM331T is a universal Gigabit SFP metal module with RJ45 connector for metal cable with a data rate of 10/100/1000 Mbps. The range of the module is up to 100m, it has a durable metal chassis, which helps with good heat dissipation.
TP-Link TL-SM5310-T, 10G Metallic module, SFP+
TL-SM5310-T is a universal 10-Gigabit SFP+ metallic module of the TP-Link brand with an RJ45 connector for a metallic cable with the option of data rate 100M/1G/10 Gbps. The range of the module is 100 m at speeds from 100 M to
