Powering

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifi

The USW-Lite-8-PoE is a fully managed Layer 2 switch with 8 Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide upto a total PoE wattage of 52W for UniFi Access Points or oth

MaxLink PI30 is Gigabit PoE injector of white color with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. Po

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

High-quality, stabilized white Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.32A. The maximum output power is 15,4W.

The Ubiquiti UniFi Switch Flex 2.5G PoE is a compact switch designed to expand networks in home and office environments, particularly for connecting powered devices. It features 8x 2.5Gbit ports with PoE 802.3af/at/bt (POE++ 60W) support, enabli

Adapter from a two-pole terminal block to standard DC jack with size 2.1/5.5mm. Adapter is suitable for powering analog cameras or other devices without PoE technology. Just bring a two line DC cable and simply connect it to the terminal block m

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

The Ubiquiti POE-24-12W-WH is a grounded PoE injector with a maximum output power of 12 W. It provides one input port for a traditional LAN connection and a second port as a PoE output port. The maximum data transfer rate is 100 Mbps. This device is no

The passive PoE extractor is used to separate data and power connector at the end of the cable. Especially suitable for routers, APs and switches without passive POE support. PoE does not supports 802.3af/at specification. Pins 4,5 (-) and 7,

MaxLink MAXPIDIN30 is an active PoE injector with DIN rail mounting with input DC power supply 12 to 48V. The output of this power source is a Gigabit port with 802.3af/at PoE (55V) designed for WiFi, VoIP or wireless links. PoE is distri

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

MikroTik OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 24W and a ma

The second generation UniFi switches bring many changes and improvements, the switches have been redesigned from the ground up. Compared to the first generation, there is a significant improvement in airflow, which is used for cooling, ma

MikroTik OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, shorter LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum po

OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, MikroTik devices with input voltage 48V DC. The power adapter has a maximum power 96W and a maximum output current 2A. A power cord is als

Original MikroTik power adapter 48POW with EU plug for plugging into a socket, with a standard 5.5 / 2.1mm connector intended for powering, for example, MikroTik devices with input voltage 48V DC. The power adapter h

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

UISP-S is an ideal switch for deployment between ISP providers. It is a L2 PoE switch without fans, with 8x Gigabit LAN and one SFP port for further expansion using optical fiber. The UISP Switch is a cost-effective solution where gigabit

PoE injector POE1A2L is used to power WiFi devices via Ethernet cable using so-called passive PoE. This PoE injector has 2.1/5.5mm power connector and two Ethernet ports, of which the port labeled PoE is toward the powered device. Passive PoE is

The USW-Pro-48 is a manageable Gigabit L2 switch with 48x Gigabit LAN ports and four SFP+ ports with a transfer rate of 10Gbps. In addition to the standard equipment, the switch also has a 1.3" touch screen for providing informatio

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.3A. The maximum output power is 7W. Suitable for these products LBE-5AC-23 LBE-5AC-Gen2b

The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen, compact size, and fanless

Ubiquiti Pro Max 16-PoE is a new L3 switch that offers 4x 2.5 Gbps ports with PoE++ up to 60W and 12x 1 Gbps ports with PoE+. The total PoE budget is 180 W. For optical interface connection, there are 2 SFP+ po

USW-16-POE is a configurable Gigabit Layer 2 switch with 16 Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and 2 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink opti

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

TL-POE160S is a very robust Gigabit power PoE injector that supports 802.3af/at standards with power up to 30W, which is a suitable solution for powering most IP cameras, VoIP, WiFi AP and other devices. The injector has an LED indication

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. Package contains PoE adapter Power cord

This is highly versatile, highly compactible desktop (with the option to buy rack mounts) unmanageable PoE switch called POESG-8-7P. The switch has 8x 10/100/1000Mbps ports whereas on seven ports you can use PoE Out function and thus connect/power any