Power cables and adapters

Adapter from a two-pole terminal block to standard DC jack with size 2.1/5.5mm. Adapter is suitable for powering analog cameras or other devices without PoE technology. Just bring a two line DC cable and simply connect it to the terminal block m

USP-Cable is a special DC power cable designed for the Ubiquiti SmartPower System. This cable connecting UniFi Switch and the UniFi SmartPower (USP-RPS) from which it will receive power if the built-in power source fails. The cable is 1.5m l

POZOR !!!; Před připojením je nutné zkontrolovat polarizaci kabelu. SPECIFIKACE; Typ konektoru: O 2.1 / 5.5 mm Třída kabelu; Připevňování vodiče: Pájení; Délka kabelu: 1.5 m; Určení: Elektrický kabel; Materiál: PET; Příklad použití: • OMY-2X0.75; • K-6...

Teltonika 1.5 m power cable terminated at one end with a 4-pin connector with protection against accidental disconnection and at the other end with 4 shaved wires. The cable is primarily intended for powering these Teltonika devices -

Power cable 1.8 m long with angled end (connector to PC). Particularly suitable where is not space for desktop PC or switches / routers in a data rack.

Cable reduction with 1 power socket for connection to UPS with IEC connectors. Completely product length is 30cm.

Napájecí redukce z přístrojů s US plochou vidlicí na EU zásuvky. Max zatížitelnost 230V 6A. Při používání této redukce je třeba brát v potaz skutečnnost, že US zařízení jsou obvykle určena pro napětí 110V!; Redukce se dá použít i jako prodloužení EU vi...

Praktický prodlužovací kabel s 5 zásuvkami. Na kabelu naleznete také centrální vypínač pro snadné a rychlé odpojení spotřebičů od elektrické sítě. Parametry a specifikace: Počet zásuvek: 5; Délka kabelu; 5m; Centrální vypínač; Ano; Baleno v PE sáčku se...

Typ konektoru plochý; Šířka 6.3mm; Tloušťka 0.8mm; Druh konektoru zásuvka

European EU Schuko to UK 3 Pin Converter Plug 13A, Black (Grounded). A mains adaptor allowing mains leads with European type circular Schuko plugs to be converted into UK, 3-pin mains plug. Suitable for straight and most right angle Sch

Fused at 3A, Voltage: 220-250V Max load: 600W Simple, safe and fast method of plug conversion Approved to BS5733, BS1363-5 plug/socket features and BS1362 fuse link Colour: Black

Průřez vodiče 4,0 - 6,0 mm2; Materiál: elektrolytická měď, pocínovaný; PVC izolace, s rozšířenou izolační objímkou, vhodný pro harmonizované kabely

Conductor cross section 4.0 - 6.0 mm2 Material: electrolytic copper, tinned PVC insulation, with extended insulation sleeve, suitable for harmonized cables

Typ konektoru: O 2.1 / 5.5 mm Jednoduchá zásuvka; Připevňování vodiče: Kabelové svorky; Délka kabelu: 0.20 m; Určení: Elektrický kabel; Materiál: PET; Příklad použití: OMY-2X0.75; K-60; YAP; Vybrané vlastnosti: Velmi jednoduchá a rychlá montáž; Proud :...

PC-12 PowerCable is an all-weather, UV-resistant cable designed for outdoor installations. PowerCable uses a fire-resistant, polyethylene jacket (FT-1) and operates in a temperature range from -30 to 90° C. PowerCable features 12 AWG stranded tinned co

The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

The DC link cable terminated by ears on both sides is ideal for connecting M8 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

The DC link cable terminated by ears on both sides is ideal for connecting M8 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

Power cable with a switch, featuring a DC female connector 5.5 / 2.1 mm on the input side and bare contacts on the output side. Cable is 22AWG, switch with a current limit of 2A. Total cable length 150 cm: 100 cm DC connector t

Cable adapter with three sockets for connection to UPS with IEC connectors. Specifications Cable length 30 cm Max. operating current 10 A Nominal voltage 250 V IEC C14 plug CEE 7/5 (E)

Krytka na mínusovou svorku autobaterie. Pólová krytka slouží jako ochrana proti zkratu baterie při manipulaci s baterií. Užitečná například při nechtěnném kontaktu s kovovým nářadím při provádění výměny baterie, ale také před vlivy koroze, oxidace a ag...