Active PoE

MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

Internal PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

U-POE-at from Ubiquiti Networks is a high-quality Gigabit PoE injector with one PoE output port for powering devices with 802.3at support with a maximum output power of 30W, which is sufficient for the latest devices such as U6

TL-POE160S is a very robust Gigabit power PoE injector that supports 802.3af/at standards with power up to 30W, which is a suitable solution for powering most IP cameras, VoIP, WiFi AP and other devices. The injector has an LED indication

USB converter serve to powering any device by USB port. Its converting 802.3af PoE to 5V/2A with 10W maximum load. Example of installation Important note: converter does not convert data from Ethernet to USB, but only power

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your netw

MaxLink MAXPIDIN60 is an active DIN rail mounting PoE injector with DC power input from 12 to 48 V and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V) which is dedicated for Wi

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

The GPeR unit allows to extend Ethernet cable by additional hop (

The Long-range Indoor/Outdoor Repeater (UACC LRE) is Gigabit adapter that allows you to easily and inexpensively expand your Ethernet network's range. With its (2) GbE RJ45 ports, the UACC LRE can receive 802.3af/at PoE/PoE+ while providing passthrough

Outdoor PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

Outdoor PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga

MaxLink MAXPIDIN60F is an active DIN rail mounting PoE injector with DC power input from 12 to 57 V and built in power converter. Injector has one POE LAN port output and one SFP port output. The output of this power supply is 1Gbit port with su

S tímto adaptérem můžete napájet Raspberry PI i jiné jednodeskové počítače a další zařízení s napájením přes USB type C konektor. Díky tomu můžete tato zařízení velmi flexibilně použít a nepotřebujeme žádnou zásuvku ani síťový adaptér. Tímto adaptérem ...

MaxLink PI30 is Gigabit PoE injector of white color with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. Po

With this adapter, you can power Raspberry PI (all models), other single-board computers, and other devices powered by the Micro USB connector. This allows you to use these devices very flexibly and we don't need a power outlet or AC adapter. T

MaxLink PI90 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 95W. For better distribution of the current load, all 4 pairs of conductors are powered. Can als

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

The PoE+ Injector TL-POE260S fully complies with IEEE 802.3af/at standards, and can work with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) or other equivalent product, to expand you network to where there are no power line or outlet, where y

The Omada 10G PoE++ injector allows you to transmit data and power your devices with a single cable. It includes 1 LAN port with 10Gbps speed as output with PoE and 1 LAN port with 10Gbps speed for input connection. It is fully compliant with 802.3bt/a

Product description prepares.

The Huawei AD-560062T0E is a Gigabit POE injector with one output POE port for powering devices supporting 802.3af/at with a maximum consumption of up to 35W. The power injector is suitable especially for powering APs, IP cameras, VoIP phones, etc.

TP-Link POE10E PoE extends a PoE/PoE+ network connection an additional 100 m/250 m (10 Mbps mode) from the PoE power sourcing equipment. Supplies up to 20W, which meets the power consumption requirements of most IP cameras.

TL-POE170S is a very robust Gigabit power PoE injector that supports 802.3af/at/bt standards with a power of up to 60 W, which is a suitable solution for PTZ power supply cameras, LED panels, more powerful Wi-Fi APs and other devices. The