Power cables and adapters
Extension cords
AC cables and adapters(10)
DC cables(20)
DC adapters and reductions(9)
Connection between battery(14)
Crimping eye terminal(4)
Reduction jack / terminal, MALE standard DC 2.1 / 5.5 power connector (for CCTV cameras)
Adapter from a two-pole terminal block to standard DC jack with size 2.1/5.5mm. Adapter is suitable for powering analog cameras or other devices without PoE technology. Just bring a two line DC cable and simply connect it to the terminal block m
Pressing connector GF-M8, 8mm hole, yellow isolation
Průřez vodiče 4,0 - 6,0 mm2; Materiál: elektrolytická měď, pocínovaný; PVC izolace, s rozšířenou izolační objímkou, vhodný pro harmonizované kabely
Cable adapter from UPS (IEC C14) to 1 socket 230V, 30cm
Cable reduction with 1 power socket for connection to UPS with IEC connectors. Completely product length is 30cm.
Teltonika PR4MK04K 4-Pin terminal
4-pin socket with contact terminal for Teltonika devices.
Cover conectors M5-M8 black
Krytka na mínusovou svorku autobaterie. Pólová krytka slouží jako ochrana proti zkratu baterie při manipulaci s baterií. Užitečná například při nechtěnném kontaktu s kovovým nářadím při provádění výměny baterie, ale také před vlivy koroze, oxidace a ag...
Conectors cover M5-M8 red
Krytka na plusovou svorku autobaterie. Pólová krytka slouží jako ochrana proti zkratu baterie při manipulaci s baterií. Užitečná například při nechtěnném kontaktu s kovovým nářadím při provádění výměny baterie, ale také před vlivy koroze, oxidace a agr...
DC-DC cable between batteries, 15cm, 2x M6 hole
The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a
Ubiquiti UniFi Smart Power Cable, USP-Cable
USP-Cable is a special DC power cable designed for the Ubiquiti SmartPower System. This cable connecting UniFi Switch and the UniFi SmartPower (USP-RPS) from which it will receive power if the built-in power source fails. The cable is 1.5m l
Power splitter ACB-2CH, 2x male, 1x female
Rozbočovací kabel DC napájení s konektory 2x samec (male) na 1x samice (female). Konektory mají rozměry 2.1/5.5mm a celková délka je 19cm.
Reduction jack / terminal, FEMALE standard DC 2.1 / 5.5 power connector (for CCTV cameras)
The F-21-55 is a power adapter from a two-pole terminal block to a socket for a standard DC jack with a size of 2.1/5.5mm. Adapter is suitable, for example, when you need to connect an LED strip to your power adapter, which has prepared cables m
Maxlink adapter for UPS(3 sockets), max. 250V, 10A, length 30cm
Cable adapter with three sockets for connection to UPS with IEC connectors. Specifications Cable length 30 cm Max. operating current 10 A Nominal voltage 250 V IEC C14 plug CEE 7/5 (E)
Ubiquiti UACC-Cable-PT-10M - UISP power TransPort cable, 10m
Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 10m long. The cable is very robust, contains 2 wires
Ubiquiti UACC-Cable-PT-5M - UISP power TransPort cable, 5m
Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 5m long. The cable is very robust, contains 2 wires w
Ubiquiti UACC-Cable-PT-1.5M - UISP power TransPort cable, 1.5m
Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 1.5m long. The cable is very robust, contains 2 wires
Strips Power ACB-4CH
Typ konektoru: 2.1/5.5 mm Jednoduchá zásuvka / 4 x 2.1/5.5 mm Třída kabelu; Materiál: PET; Délka kabelu: 4 x 0.21 m; Vybrané vlastnosti: • Velmi jednoduchá a rychlá montáž; Hmotnost: 0.032 kg; Rozměry (DxŠxV): 150x30x30 mm; Balení: Žádné
MaxLink power cord 230V, 3-conductor, 1.2m, tinned connectors, EU standard
3-conductor power cord with shielded tinned end of the wires on one side. It is a cable designed to connect industrial power resources to the power supply. This cable has 1.2m length of and does not match the Czech version (the blue lead is conn
MaxLink power cord 230V, 3-conductor, 1.2m, tinned connectors, CZ standard
3-conductor power cord with shielded tinned end of the wires on one side. It is a cable designed to connect industrial power resources to the power supply. This cable has 0.5m length of and match the Czech version (brown lead is connected to the
Strips Power ACB-8CH
Rozbočovací kabel napájení, konektory 1x FEMALE (samice) na 8x MALE (samec). Typ konektoru: 2.1/5.5 mm / Jednoduchá zásuvka / 8 x 2.1/5.5 mm Třída kabelu; Materiál: PET; Délka kabelu: 8 x 0.21 m; Vybrané vlastnosti: • Velmi jednoduchá a rychlá montáž; ...
Extension cable 1.5m, 6x socket
Kabel prodlužovací 1,5m 6x zásuvka;
Extension Cable 5 m 6x socket
Extension Cable 5 m 6x socket
Teltonika 4-pin to 4-pin power cable, 1m
Teltonika 1m power supply cable terminated at both ends with a 4-pin connector with protection against unwanted disconnection. The cable is primarily intended for powering the following Teltonika devices: RUT200, RUT2
Ubiquiti UACC-Cable-PT-20M - UISP power TransPort cable, 20m
Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 20m long. The cable is very robust, contains 2 wires
Teltonika PR5MEC21 - 4-Pin Power Adapter With I/O Access
Teltonika PR5MEC21 is adapter intended mainly for routers from Teltonika. The adapter enables control using IoT devices like as Raspberry Pi, etc.
DC-DC cable between batteries, 30cm, 2x M6 hole
The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a
DC-DC cable between battery and power source, 30cm, M6 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
DC-DC cable between battery and power source, 60cm, M6 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
DC-DC cable between battery and power source, 90cm, M6 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
DC-DC cable between battery and power source, 120cm, M6 hole - wire end
An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur
DC-DC cable between batteries, 15cm, 2x M8 hole
The DC link cable terminated by ears on both sides is ideal for connecting M8 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a
DC-DC cable between batteries, 30cm, 2x M8 hole
The DC link cable terminated by ears on both sides is ideal for connecting M8 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a