SFP optical modules

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance up to 20 kilometers which can basically satisfy the distance requirement of LAN. Users can choos

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 2 pieces.

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains

TP-LINK´s TL-SM321A-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321A-2 uses an integrated LC Bi-Directional optical interface connector and the data link

TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products

ML-S31D-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

The TL-SM5110-LR is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission both ways) SFP+ transceiver with support for the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a di

The SM5110LSB-10 is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission in both directions) SFP+ transceiver supporting the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a

This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device that has SFP+ ports can now

TL-SM331T is a universal Gigabit SFP metal module with RJ45 connector for metal cable with a data rate of 10/100/1000 Mbps. The range of the module is up to 100m, it has a durable metal chassis, which helps with good heat dissipation.

S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM. Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

The Ubiquiti UACC-OM-SM-10G-S-20 is an SFP+ data transmission module using single-mode optical fiber. The data transfer rate is 10 Gbps, the maximum power consumption is 1 W, and the transmission range reaches 10 km. SFP+ module

The UACC-OM-SFP28-LR is an optical module that operates at speeds up to 25 Gbps. It operates in Single-mode and guarantees a range of up to 10 km Key features Transfer speed up to 25 Gb/s Range up to 10

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

ML-S31D-out-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The Industrial version of the SFP module differs from the normal one wi

ML-S31D-out-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 20km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The Industrial version of the SFP module differs from the normal one w

ML-S5531-out-20 is a 1.25G WDM SFP module with wavelengths Tx1550/Rx1310nm, one LC connector and a maximum distance 20km over single-mode optical fiber. SFP module supports DDM - digital diagnostics monitoring. The industrial version of the SFP module

ML-S3155-out-20 is a 1.25G WDM SFP module with wavelengths Tx1310/Rx1550nm, one LC connector and a maximum distance 20km over single-mode optical fiber. SFP module supports DDM - digital diagnostics monitoring. The industrial version of the SFP module

ML-SFP-RJ45-10G is a 10 Gbps SFP+ metalic module with an RJ45 connector for metalic cable. This is a Cisco compatible module. The module has range up to 100m.

Huawei OSX040N01 is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 40km. The LC connectors in the SFP module have UPC polishing.