Accessories

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

The Universal Arm Bracket is designed for convenient wall or pole mounting of the NanoStation®M. 90° tilt adjustment allows for easy positioning.

U-PRO-MP universal mounting system is more versatile than standard plastic holders and can be mounted on wall or plastic boxes of different sizes in the wall. The system is compatible with these drives: UAP-AC-PRO UAP-AC-HD

Wall mount for Unifi Access Points. It is made from plastic and weights only 160 grams. Dimensions are 200,5 x 175,1 x 31,2 mm. Compatible devices U7-Pro U7-Pro-Max

RJ45 Waterproof kit is a cable gland Ethernet kit for separating indoor and outdoor cabling when mounting in any mounting box. On the outside there is a keystone with an RJ45 connector and on the inside there is a 20 cm FTP cable with a shielded TP cab

WiFiMan Wizard is a portable spectral analyzer designed for the WiFiMan iOS and Android mobile application with which it communicates wirelessly via Bluetooth. Together with a Lidar-equipped smartphone, it is able to project t

Protective cover for the U7 Pro that can be painted for a custom appearance. Compatible coloring materials Spray can (Krylon/Telox) Acrylic color Pos

The OJB-100 is your go-to solution for seamlessly installing Omada and Festa wall plate APs directly onto bare walls. Compatible with models like EAP775-Wall V1.0, EAP725-Wall V1.0, Festa F65-Wall V1.0, EAP655-Wall V1.0 and EAP615-Wall V1.0. Thi

Snadno použitelný držák Ubiquiti přístupového bodu Rocket nebo jiného zařízení se stejným systémem naklapnutí. Lze montovat na stěnu nebo jinou plochu pomocí 3 - 4 šroubů (součást balení). Montáž na parabolické antény: JRC-24 MIMO; JRC-24EX MIMO; JRC-2...

The plastic wall mount is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Lite, UAP-nanoHD and UAP-AC-Lite. The holder is attached to the wall using two screws

Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r

The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in

Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws

The Precision Mounting Bracket is used to mount the cnWave V3000 Client Node on a vertical pole, providing fine adjustment up to 18° in azimuth and +/-30° in elevation for accurate alignment of the V3000. The Precision Bracket is compatible with pole d

The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.

nHD-cover-Black-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Black design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE i

Excellent plastic holder designed to places where it is not possible to drill through the suction cup so it can be mounted on the window. The holder can be locked in all directions.

Cambium Networks cnWave V5000,V3000 / PMP450i/PTP550(E) Tilt Bracket Assembly. The universal mounting bracket fitting to cnWave V5000,V3000 and PMP450i, PTP550(E) products.

The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.

The Ubiquiti U7 Pro Wall Table Stand is an elegant and very light table stand for the Ubiquiti U7 Pro Wall device.

The 5 GHz RocketDish to airFiber® Antenna Conversion Kit, model AF-5G-OMT-S45, converts the RocketDish RD-5G30 or RD-5G34 antenna for use with the airFiber AF-5X radio.

Precise GPS Synchronization Using a common GPS timing reference, the airFiber X radios work cohesively to deliver powerful, multi-Gigabit bridging performance for PtP links. 4x4 M

This plastic mounting box made of PVC material is suitable for installing the UniFi AP In Wall model in a plasterboard wall. For proper holding in plasterboard, 2 screws in opposite corners with plastic flags serve as a support against sliding the box

nHD-cover-Marble-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Marble design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE

The MOX E module is an ideal choice if you need more ethernet ports to connect devices to your network. It has twice the width of the other modules and contains an eight-port manageable switch for gigabit ethernet. Compatibility U

The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.

Introducing the Turris Omnia 5G Kit At Turris, we are always looking for ways to empower our users with the latest technology, and we're excited to announce our latest upgrade: the Turris Omnia 5G Kit! This new kit will allow you to unlo

Plastic holder, 3D-printed using PETG material. Compatible with TP-Link EAP access points. 610 613 620 HD 650 653 660 HD 670 670 v2

The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color