Accessories

The F module expands your configuration with more USB 3.0 ports with transfer speeds of up to 5 Gbps that you can use to connect external drives, TV tuners and other devices. Compatibility There can be only one MOX F module in the

The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.

WiFi card RTROM01-WS3294 is a wireless miniPCI-e card with 4× u.Fl connectors, support for WPA2 encryption, modulation speed up to 1733 Mbps in the 5GHz band (4×4 MU -MIMO) or 600 Mbps in the 2.4GHz band (4×4 MU-MIM

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The plastic holder is designed to hold selected MikroTik products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

nHD-cover-Concrete is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Concrete design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not

Plastový držák je určený pro uchycení bezdrátových jednotek HX220 a HC220 značky TP-Link na stěnu a to pomocí dvou šroubů. Držák je vyroben z PETG materiálu na 3D tiskárně, má bílou barvu a celkové rozměry jsou 110 x 140 x 40mm.

Plastový držák je určený pro uchycení vybraných TP-Link produktů (viz níže) do 19" a 10" racku . V případě uchycení do 19" racku je možnost uchycení vpravo, vlevo nebo dvou držáků vedle sebe. Vnitřní rozměry rámečku jsou 226 x 131 x 35mm. Kompatibilní ...

The plastic mounting box is intended for covering the cables and attaching the wall-mounted WiFi AP EAP235 and EAP615-Wall from TP-Link to the wall using two screws. The holder is made of PETG material on a 3D printer, it is white in color

Magnetic GPS Ubiquiti antenna with SMA male connector and 1m cable lenght.

The Dual Band WiFi 6 card model AW7915-NP1 features a miniPCI-e interface with 4 × u.Fl connectors, supporting WPA3 encryption and modulation speeds of 2401 Mbps in the 5 GHz band (4×4) or 574 Mbps in the 2.4 GHz band with

Holder compatible with JRA-2xxx antennas, Ubiquiti wireless units with a compatible RocketKit mount can be attached directly to the antenna. Usage: can be mounted on JRA-2xxx antennas using 3 - 4 screws (included in the packa

FREE wifi sticker with diameter of 10cm.

The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible

IW-HD-BK is a cover for Ubiquiti UAP In-Wall HD with a black theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-CF je kryt k Ubiquiti UAP In-Wall HD s maskovaným motivem. Pro náročné zákazníky je na výběr celkem z 5ti volitelných motivů krytů. Na četné žádosti zákazníku jsme se rozhodli kryty prodávat také po jednotlivých kusech, balení produktu tak není v...

IW-HD-CT is a cover for Ubiquiti UAP In-Wall HD with a concrete theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-MB is a cover for Ubiquiti UAP In-Wall HD with a marble theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-WD is a cover for Ubiquiti UAP In-Wall HD with a wooden theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

nHD-cover-Black is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Black design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not offici

nHD-cover-Camo-3 is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Camo design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not offici

nHD-cover-Fabric is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Fabric design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not offi

nHD-cover-Marble is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Marble design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not offic

The holder is designed for attaching TP-Link HX510 wireless units to the wall using 2 screws. The holder is made of PETG material on a 3D printer in a white colour.

Wall mount for Unifi Access Points. It is made from plastic and weights only 160 grams. Dimensions are 200,5 x 175,1 x 31,2 mm. Compatible devices U7-Pro U7-Pro-Max

Magnetic wall mount for Cloud Gateway Max, Cloud Gateway Ultra, and Gateway Max.

• univerzální držák na stožár o19 - 54 mm; • jednoduchý; • snadná montáž; • vyrobeno z pozinkovaného plechu; • galvanický zinek s chromátem pro dlouhou životnost; Balení: • po 10 kusech;

Nový design pro snadnější montáž a stabilnější dotáhnutí po nasměrování. Použití: antény pro mikrovlnné spoje až do 90 GHz; Specifikace: držák JDMW-400 je určen k anténám s požadavkem na snadnou manipulaci a vysokou stabilitu; vysoká korozní odolnost; ...

Nový design pro snadnější montáž a stabilnější dotáhnutí po nasměrování. Použití: antény pro mikrovlnné spoje až do 90 GHz; Specifikace: držák JDMW-900 je určen k anténám s požadavkem na snadnou manipulaci a vysokou stabilitu; vysoká korozní odolnost; ...

Držák antén určený především pro antény JPA-9, JPA-10 a JPC-13. Umožňuje variabilní uchycení a natočení antén. Použití: • jednoduchý; • snadná montáž; • možnost nastavení ± 90° po 30° v jedné rovině (v elevaci nebo azimutu); • ve druhé rovině lze nasta...