Accessories

The plastic holder is used for horizontal installation of UniFi Access Points from Ubiquiti U6-PRO and UAP-AC-PRO on the wall or as a stand on a table. The holder can be installed with the UniFi plate up and down and

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The plastic holder is designed to mount the UCK-G2-PLUS from Ubiquiti to 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other.

The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig

The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig

The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig

The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are

The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.

Plastic inwall juction box is suitable for installation of UniFi AP In Wall HD (UAP-IW-HD). The mounting box has several holes on the back side for attaching or inserting the Ethernet cable. The box also has 2 pillar for attach UAP unit. The

Mast holder without tilt, mast diameter 25 - 77 mm, for Cambium's cnWave V5000 units

The Precision Mounting Bracket is used to mount the cnWave V3000 Client Node on a vertical pole, providing fine adjustment up to 18° in azimuth and +/-30° in elevation for accurate alignment of the V3000. The Precision Bracket is compatible with pole d

Cambium Networks cnWave V5000,V3000 / PMP450i/PTP550(E) Tilt Bracket Assembly. The universal mounting bracket fitting to cnWave V5000,V3000 and PMP450i, PTP550(E) products.

The MOX PoE add-on can be used to provide power to the Turris MOX router over ethernet without having to use a separate power cable. It connects to the MOX A (Basic) module which is part of all MOX configurations. It is compliant with IEEE standards 80

RJ45 Waterproof kit is a cable gland Ethernet kit for separating indoor and outdoor cabling when mounting in any mounting box. On the outside there is a keystone with an RJ45 connector and on the inside there is a 20 cm FTP cable with a shielded TP cab

NanoHD-RCM-3 is a three-pack of ceiling mounts for UAP nanoHD, U6-Lite, U6-Lite or U6+, thanks to which you can embed your devices in the ceiling. Both packaging (3) ceiling mount

NanoHD-RetroFit-3 is a mounting kit for attaching the UAP-nanoHD unit to the wall or ceiling with the original UAP, UAP-LR mounts. Once mounted, your UAP-nanoHD, U6 Lite or U6+ will blend in with the walls because the Retrofit Mount kit elimina

If you add the MOX Wi-Fi add-on (SDIO) to your MOX Start set, you will get a Wi-Fi router with Bluetooth support.

Twin Horn Bracket allows you to install two symmetrical Horn antennas with exactly the same alignment. The bracket also accommodates mainstream 4x4 radios, such as ePMP™ 3000 or Mimosa® A5c. High density sectors or 4x4 deployments are now ingeniously s

Turris Omnia diplexer is a spare part intended for cases where the original diplexer has been broken due to careless handling. Used to merge the signal from two cards (2.4 and 5 GHz) into one RP-SMA connector. Package contents

Turris Omnia cooler for LTE modem. The cooler is equipped with a self-adhesive heat-conducting layer. Mounting the passive cooler is done simply by gluing it directly onto the modem plate.

RTROM01-RM is a set of two metal mounts intended for mounting the Turris Omnia 2020 in a 19" rack. Due to a different mount it is not possible to use this rack mount kit also for the Turris Omnia 2019. Double-sided router mounting T

IW-HD-BK-3 is a set of 3 covers for Ubiquiti UAP In-Wall HD with a black theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-CF is a cover for Ubiquiti UAP In-Wall HD with a camo theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-CT-3 is a set of 3 covers for Ubiquiti UAP In-Wall HD with a concrete theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-MB-3 is a set of 3 covers for Ubiquiti UAP In-Wall HD with a marble theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-WD-3 is a set of 3 covers for Ubiquiti UAP In-Wall HD with a wooden theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

MOX B allows you to add more hardware to your configuration. It contains a mPCIe slot for a compatible Wi-Fi card, disk controller or LTE modem. If you choose to install an LTE modem, the MOX B features a SIM card slot that you can use. If you use Wi-F

The MOX C module contains a four-port manageable switch for gigabit ethernet. Compatibility There can be only one MOX C module in the configuration; the SGMII bus is terminated there. For this reason, the MOX C cannot be combined

Přestavba jednopolarizačních antén JRC-29 a JRC-29 EXTREM na dvoupolarizační přestavbou získáte plnohodnotné antény JRC-29 MIMO nebo JRC-29EX MIMO . V balení je celá sada nerezového spojovacího materiálu. Jedná se o balení pro jednu anténu. Tato verze ...

Přestavba jednopolarizačních antén JRC-29 a JRC-29 EXTREM na dvoupolarizační přestavbou získáte plnohodnotné antény JRC-29 MIMO nebo JRC-29EX MIMO . V balení je celá sada nerezového spojovacího materiálu. Jedná se o balení pro jednu anténu. Tato verze ...