Accessories

Compact plastic DIN Rail adapter (70x25x14,5mm) PR5MEC11, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Surface mounting kit PR5MEC12, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Mobile SMA Antenna for the bands of 698-960/1710-2690 MHz and 3 dBi max. gain, type of mounting - screw on. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Mobile magnetic SMA Antenna for the bands of 699-868MHz, 1850-2690MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB1

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

Teltonika PR2VM20M SMA is cable extension with lenght of 2000 mm with SMA connectors (female a male).

Combo antenna with a total of five 3m cables, terminated with 3x SMA Male and 2x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated with

DIN Rail adapter PR5MEC00 Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

LTE Antenna Teltonika PR1KCL28 - SMA. Combo mobile / GNSS roof antenna with IP67 protection, which includes 4x LTE antenna cables and one GPS. Interface: 1× RG174 (GNSS), 4× RG174 (LTE MIMO).

Teltonika PR1KC640 5G combo MIMO mobile/GNSS/Wi-Fi roof SMA antenna. Comes with 4x SMA (5G), SMA (GNSS), 2 x SMA (WiFi). Antenna is compatible with RUTX50 and TRB500. Operation frequencies: 5G: 617 - 960, 1710 - 2690, 2900 -

WiFi magnetic RP-SMA Antenna for the frequency of 2400-2483.5/5150-5905 MHz and 3 dBi max. gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUTX10 and RUTX11.

LTE antenna with 2.5dBi gain and two 3m cables terminated with SMA Male connectors for 698-960 MHz and 1710-2690 MHz bands. The antenna is suitable not only for all Teltonika routers that are equipped with SMA connectors for connecting an exter

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

Teltonika Bat120 is a small UPS that only works with DC voltage and hides a small 2300 mAh battery (17 Wh) for bridging short outages for Teltonika Facility with 4-pin connector. On the one hand, the input and output

WiFi magnetic RP-SMA Antenna for the frequency of 2.4-2.4835 GHz and 2 dBi gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955.

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

Combo antenna with a total of three 3m cables, terminated with 2x SMA Male and 1x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated wit

Mobile adhesive SMA Antenna for the bands of 824-960/1710-2170 MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TR

AUTOMOTIVE POWER SUPPLY, 9-30VDC, 2A, dedicated for Teltonika products (RUT 230/240/850/900/950/955, RUTX08/09/10/11/, TRB140/141/142/145)

TRB DIN rail kit for Teltonika products in plastic design. KIT RAIL DIN TRB PR5MEC13, PCB carrier, 2 pcs Screws, 4pcs for TRB140/TRB141/TRB142/TRB145 Parameters 35mm standard DIN Rail, 32mm G profile

Beacon with battery life reaching up to 18 years, identifies and tracks industrial equipment within a radius of 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Beacon with battery life reaching up to 5 years, identifies and tracks industrial equipment within a radius of 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Compact beacon enables localization and automated inventory management within 300 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring heat-sensitive goods within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Robust wireless sensor automatically detects magnetic contact loss or valves opening within 500 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Power supply 12V, 20W, mounted directly on the DIN rail. Input voltage 100-240 VAC 50/60 Hz