PC Engines Alix

R11e-2HPnD is our new 802.11b/g/n Dual Chain high power 1000mW miniPCI-e card, operating in full 2192-2732 MHz frequency. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapters - RB14e/RB14eU. Unit is equipped with two MMCX connect

R11e-5HacD is our new 802.11ac card in miniPCI-express format, perfect for any RouterBOARD with miniPCIe slot, such as RB953, RB912, RB922, RB800 or x86 devices with RouterOS. The card features built-in LED indicators for wireless mode, conne

The metal latch sockets on apu boards don't always latch as nicely as they should. Please make sure the latch is properly seated to avoid cards unsocketing during shipment of assembled systems. mSATA and miniPCI express slots look exactly the same, but

Pigtail cable u.Fl (IPEX) to RSMA female, 15cm long, designed for frequency range 0 up to 6GHz with maximum attenuation 1,5db. It is a very quality RF cable reduction from antenna to miniPCI cards.

High power 4920-5920MHz 802.11a/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection s

Antenna for 2.4 GHz and 5 GHz band, 5 dBi peak gain in 2.4 GHz band. Reverse SMA connector. Dual band antennas are always a compromise, use single band antennas for best gain in a specific frequency band...

R11e-2HnD is a Low-profile Lower power version of our 2.4Ghz miniPCIe card - it has a small heat-sink, u.Fl connector and less output power (800mW). Low profile is useful if you need to install the card in device like a laptop.

An extra cost-effective upgrade of our previous R11 LTE4 modem. It offers the same speed (up to 150 Mbps) and features as the earlier version.

R11eL-FG621-EA is an LTE modem in mini PCIe card format. It supports LTE and 3G technologies. It is a high quality modem that has 300 Mbps downlink and 50 Mbps uplink. Thanks to carrier aggregation, the device can use multiple bands sim

Nový duální 802.11a/n miniPCI adaptér od Compexu, MIMO 2T2R 300Mbps pro pásmo 5GHz, je založen na AR chipu 9220 a je chráněna integrovanou ESD ochranou (15KeV). Rychlý a stabilní datový tok zajišťuje HighPower výstupní výkon 23dBm (na kanál) / 26dBm (4...

SMA female pigtails are commonly used for 3G/LTE modem antenna ports.

The heat spreader kit is included with apu boards, no need to order separately unless you have to migrate a board to a new enclosure.

The red color mounting box for the APU 4 series. The box includes holes for 4x LAN, 3x SMA, RS-232 serial port and 2x USB.

The blue color mounting box for the APU 4 series. The box includes holes for 4x LAN, 3x SMA, RS-232 serial port and 2x USB.

Thanks to the modular architecture of Alix, this piece of hardware can be used on more than 50 different embedded applications, both broadband management, security applications (firewall) and routing. Boards can also be mounted in multimedia applicatio

Thanks to Alix's modular architecture, this piece of hardware can be used on more than 50 different applications in the field of built in devices, both broadband management and firewall and routing applications. The boards can also be installed in mult

Thanks to Alix's modular architecture, this piece of hardware can be used on more than 50 different built in device applications, both broadband management and firewall and routing applications.The boards can also be installed in multimedia application

Product description prepares.

MiniPCI-express kartička EC25-E od výrobce Quectel slouží pro bezdrátový příjem LTE signálu kategorie 4 se standardním miniPCI-express rozhraním. Karta je optimalizována pro M2M a IoT aplikaci. Zvládne přenášet data rychlostí 150Mbps downlink a 50Mbps ...

WiFi card WLE900VX - wireless miniPCIe card to slot v1.1, operating with modulation speed up to 1300Mbps in 5GHz band or 450Mbps in 2,4GHz band. Card supports the 802.11ac standard and 3x3 MIMO technology! Of cours

120 GB mSATA SSD module, Kingfast, Silicon Motion SM2258XT controller, 120GB 3D TLC flash. 120 GB modul mSATA SSD pro použití s deskami řady APU. Kapacita 120 GB; mSATA konektor; Řídicí jednotka Silicon Motion SM2258XT;

Thanks to Alix's modular architecture, this piece of hardware can be used on more than 50 different built in device applications, both broadband management and firewall and routing applications.The boards can also be installed in multimedia application

Thanks to Alix's modular architecture, this piece of hardware can be used on more than 50 different embedded applications, both broadband management and firewall and routing applications. Boards can also be deployed in multimedia applications as well a

Sheet metal mounting box in aluminum color is designed for the APU.6 model line. On the front there are cutouts for micro USB serial port, SFP, 3 LAN ports, 2 SMA connectors, 2 USB and DC jack. The box is made of

The metal mounting box in black is designed for the APU.6 model line. On the front there are cutouts for micro USB serial port, SFP, 3 LAN ports, 2 SMA connectors, 2 USB and DC jack. The box is made of painted alu

The metal latch sockets on apu boards don't always latch as nicely as they should. Please make sure the latch is properly seated to avoid cards unsocketing during shipment of assembled systems. mSATA and miniPCI express slots look exactly the same, but

Red mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

SATA kabel pro desky APU.1C, kombinovaný s napájením (na straně zařízení), oddělená data a 2PIN napájení (na straně APU). Délka SATA kabelu je 7cm.

Blue mounting box designed for the ALIX.2 model line and APU 1 / 2 / 3. The box contains holes for 3 x LAN, 3 x SMA, RS-232 serial port and 2 x USB.

Black mounting box designed for the ALIX.2 model line. The box contains holes for 2 x LAN, 2 x SMA, RS-232 serial port and 2 x USB.