Optical networks

TL-SM331T is a universal Gigabit SFP metal module with RJ45 connector for metal cable with a data rate of 10/100/1000 Mbps. The range of the module is up to 100m, it has a durable metal chassis, which helps with good heat dissipation.

XQ+31LC02D is a Singlemode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels, wavelengths 1271nm, 1291nm, 1311nm, 1331nm and two LC connectors for connections up to a distance of 2 km. The module

MaxLink 40G QSFP+ DAC cable, passive is a fast and inexpensive solution for easy connection of two network active switch / router elements at 40Gbps without the need to purchase separate modules and other accessories (such as optical patch cable

Masterlan outdoor armoured optical fiber patch cord is suitable for outdoor installation due to his stiffness and resistance against the bad weather conditions. For example, wireless outdoor backhaul, which has optical port to data cabinet. Oute

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A

UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains

S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transeiv

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The TL-SM5110-LR is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission both ways) SFP+ transceiver with support for the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a di

The SM5110LSB-10 is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission in both directions) SFP+ transceiver supporting the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a

The MC420L is a media converter designed for conversion between optical and metallic fibers. It supports IEEE 802.3ae (10GBASE-SR/LR) standards for multimode and singlemode optical fibers using an SFP+ module, as well as IEEE 802.3an (10GBASE-T) for tr

Huawei FIK02 is an installation tool designed for use with FTTR optical self-adhesive cable. Its construction allows for consistent pressure to be applied along the entire cable path, ensuring better adhesion of the cable to various surfaces.

Huawei FWC01 is a set of installation clips for optical FTTR cables. The plastic accessories help secure the cable, protect it when passing through walls, and ensure the proper bending radius in both inner and outer corners. The set i

The FTK01 kit includes FTTR fiber termination tools (optical cable stripper, coating stripper, and fiber cutter) and is designed to be used with a field-mountable connector (FMC2105). This kit does not require special crimping tool

Maxlink ML-S5531-20-HPE is a 1.25G SFP WDM module with a Tx 1550 / Rx 1310 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Modern, elegant industrial design, robust construction, and high performance – that’s the Wave-Fiber-ONU, a client unit for GPON solutions. The device functions as a converter from copper to fiber and supports both Bridge and Router modes. It fe

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 10/100/1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mod

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utiliz

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 20 pieces.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

ML-S31D-40 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 40km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A

Masterlan MDIC is micro drop fiber optic cable suitable for indoor usage. It’s outer jacket is low smoke, halogen free and UV stable to ensure great overall performance. Cable consist of 2 FRP strength members to protect fibers from mechanical damage.

PLC optical splitters are most important things for building FTTx network with P2MP type (Point to Multi-Point). Our offering splitters have very low loss and high return loss. Compact size provide very easy install to cabinets and optical patch panels

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A

Ubiquiti UOC-5 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 5m length and LC-LC duplex connectors.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2