Optical networks

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

UFiber GPON SFP modul with PN: UF-GP-C+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

This cable allows you to connect device with a 40 Gbps QSFP+ port to a 4 others with SFP+ port allowing only 10Gbps transmit speed. The cable is 2 meter long.

A very narrow FTTH fiber cabinet with installation into the ground is used to connect optical cables in front of the house with very easy access. Cabinet allows the connection of up to 16 optical fibers and the termination of several optical cab

Optical SC/APC Single-mode 9/125um FAST connector with minimum instrumentation requirements for connector installation - the connector does not need to be polished. An optical fiber cleaver, stripping pliers and optical fiber cleaning sol

PLC optical splitters are a key building element for FTTx P2MP (Point to Multi-Point) access networks. The offered splitters have low attenuation and high reflection attenuation. The compact dimensions of these splitters allow easy installation in cab

Masterlan FBOX4SC is an optical plaster socket with a depth of only 29 mm. It is an ideal product for building metropolitan networks such as FTTH (Fiber To The Home). Allows you to terminate fibers on 4x SC simplex connectors (4x LC d

The optical fiber visual fault locator (VFL) with a power output of 30mW emits a visible red laser beam with a wavelength of 650nm. The device can emit either a continuous beam (CW mode) or a pulsed beam (GLINT mode). When the beam encounters an obstac

The optical fiber visual fault locator (VFL) with a power output of 10mW emits a visible red laser beam with a wavelength of 650nm. The device can emit either a continuous beam (CW mode) or a pulsed beam (GLINT mode). When the beam encounters an obstac

DS-P7001-01 is a GPON OLT unit with one GPON port supporting up to 128 clients (ONT units) with physical links reaching distances of up to 60 km. It features 1x SFP+ and 1x 2.5 Gigabit Ethernet as uplink, 1 Gigabit Ethernet for man

Masterlan duplex optic fibre coupler for LC connectors with UPC endface polishing, singlemode. without flange. It is used to connect, for example, two optic fibre patch cords.

ML-SFP-RJ45-10G-HPE is a 10 Gbps SFP+ metalic module with an RJ45 connector for metalic cable. This is a Cisco compatible module. The module has range up to 100m (up to 30m for 10G link).

Maxlink ML-S31D-3-HPE je 1.25G SFP modul s 1310nm vlnovou délkou, dvěmi LC konektory a maximální vzdáleností 3km po singlemode optickém vlákně. SFP modul podporuje monitoring (DDM). LC konektory v SFP modulu mají broušení typu UPC. HPE kompatibilita; M...

Maxlink ML-S+2733-10-HPE is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-HPE is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in

Self-bonding transparent fibers are applicable to indoor FTTH or FTTR networking scenarios. They are delivered with adhesive and can be quickly attached to suitable wall surfaces after the release film is removed After routing the optical

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Sada náhradních elektrod ke svářečkám FX39 a EX39

The wavelength division multiplexing module combines XGS/XG-PON and GPON services into one optical fiber distribution system. The module features 24 ports: 8 XGS/XG-PON ports, 8 GPON ports, and 8 ports towards clients. The filter operates with

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh

UV-resistant enclosure, designed for pole or wall mounting, with a removable reel for organization and reduced physical strain on fiber optic cables.

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh

Optical ground encloser with the possibility of installation underground or outside, for example on a pole and is used to connect optical cables, in a maximum of 144 fibers in 6 built-in optical cassettes. Each cassette can hold up to

Optical ground encloser with the possibility of installation underground or outside, for example on a pole and is used to connect optical cables, in a maximum of 48 fibers in 4 built-in optical cassettes. Each cassette can hold up to

Huawei OptiXstar EN8255X6s-8X is an XGS-PON and Wi-Fi 6 routing-type ONT. It uses the XGS-PON and Wi-Fi 6 technologies to implement ultra-broadband access, high performance and wide coverage for users. The high forwarding performan

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1