Powering

The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

Panel integrating 12 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support. You will achieve a

Lead-acid battery with 12V and 75Ah capacity. The battery is equipped with two M6 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

MaxLink PI90 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 95W. For better distribution of the current load, all 4 pairs of conductors are powered. Can als

MaxLink PI30 is Gigabit PoE injector of white color with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. Po

3-conductor power cord with shielded tinned end of the wires on one side. It is a cable designed to connect industrial power resources to the power supply. This cable has 1.2m length of and does not match the Czech version (the blue lead is conn

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

The PoE injector is suitable for powering up to eight devices supporting passive PoE. To LAN ports on one side connect device without power supply eg switch, on the other side connect devices using passive PoE - WiFi, VoIP or other devices supporting p

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

MaxLink PI60-10G is a high-quality 10-Gigabit PoE injector with a single output PoE port for powering devices that support 802.3af/at standards with a maximum power consumption of up to 60W. To ensure better distribution of the current load, power is s

Lead-acid battery with 12V and 150Ah capacity. The battery is equipped with two M6 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

Lead-acid battery with 12V and 200Ah capacity. The battery is equipped with two M8 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

MaxLink MAXPIDIN30 is an active PoE injector with DIN rail mounting with input DC power supply 12 to 48V. The output of this power source is a Gigabit port with 802.3af/at PoE (55V) designed for WiFi, VoIP or wireless links. PoE is distri

PSBT-6-4P-250 is a 6 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W/port) on ports 1 to 4, on port 1 even supports PoE standard 802.3bt (60 W).

Lead-acid battery with 12V and 28Ah capacity. The battery is equipped with two M6 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

Lead-acid battery with 12V and 45Ah capacity. The battery is equipped with two M6 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

MaxLink PI60 2x2 is a dual-port PoE injector designed for indoor use. It provides 55 VDC power for remote PDs through one PoE port or delivers 30W per port for two remote PDs simultaneously. It powers terminal devices that support the IEEE802.3af/at st

The MaxLink PI60 EXT 1x4 is a Gigabit PoE extender equipped with 1x input LAN port supporting PoE-IN and 4x output PoE-OUT ports supporting 802.3af/at. The total PoE-OUT budget of the extender is 65W. To power the extender via the PoE-IN port, y

MaxLink PI60 EXT 1x2 is an industrial PoE extender with three 10/100/1000 Mbps ports, 1x PoE-in port supporting 802.3bt/PoE++ with a power output of 60W or higher, up to a maximum of 95W and 2x PoE-out ports providing up to 30W each with

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, MikroTik devices with input voltage 48V DC. The power adapter has a maximum power 38W and a maximum output current 0.8A. A power

Panel integrating 12 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support.

The PoE injector is suitable for powering up to eight devices supporting passive PoE. To LAN ports on one side connect device without power supply eg switch, on the other side connect devices using passive PoE - WiFi, VoIP or other devices supporting p

The PoE injector is suitable for powering up to eight devices supporting passive PoE. To LAN ports on one side connect device without power supply eg switch, on the other side connect devices using passive PoE - WiFi, VoIP or other devices supporting p

MaxLink POES-8-7P-NOPS is highly versatile, highly compactible desktop unmanageable PoE switch. The switch has 8x 10/100Mbps ports whereas on seven ports you can use PoE Out function and thus connect/power any active element with the PoE supp

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

The DC link cable terminated by ears on both sides is ideal for connecting M8 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

The DC link cable terminated by ears on both sides is ideal for connecting M8 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur