Optical networks

TP-Link TL-SM7110-SR is a 40Gbps QSFP+ module with an 850nm wavelength, MPO connector, and a maximum distance of up to 150m over OM3 multimode optical fiber. It supports the OMCI protocol and DDM (Digital Diagnostic Monitori

Huawei SFP+STACK-CU0M5 is dedicated stack copper cable with length of 1,5m equipped with SFP+ connectors, which is used for device stacking. Stacking using stack cables removes the need of configurations. Bend radius of t

Huawei SFP-1000BaseT is copper RJ-45 module which supports speeds 10/100/1000 Mbps on distances up to 100m.

The Huawei SFP-GE-LX-SM1310 is a single-mode 1.25G SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 10km. The LC connectors in the SFP module have UPC polishing.

The Huawei eSFP-GE-SX-MM850 is a multi-mode 1.25G SFP module with a wavelength of 850nm and two LC connectors for connections up to a distance of 0,55km. The LC connectors in the SFP module have UPC polishing.

The Huawei eSFP-FE-LX-SM1310 is a single-mode 100Mbps SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 15km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH40-SM1310 is a single-mode 1.25G SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 40km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH40 is a single-mode 1.25G SFP module with a wavelength of 1550nm and two LC connectors for connections up to a distance of 40km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH80 is a single-mode 1.25G SFP module with a wavelength of 1550nm and two LC connectors for connections up to a distance of 80km. The LC connectors in the SFP module have UPC polishing.

The Huawei OMXD30000 is a multi-mode 10G SFP+ module with a wavelength of 850nm and two LC connectors for connections up to 0,3km. The LC connectors in the SFP module have UPC polishing.

The Huawei OSX010000 is a single-mode 10G SFP+ module with a wavelength of 1310nm and two LC connectors for connections up to 10km. The LC connectors in the SFP module have UPC polishing.

ML-S28-SM-10 is a single-mode SFP28 module with a wavelength of 1310nm, a speed of 25 Gbps (supporting lower speeds of 1 Gbps and 10 Gbps), 2x LC connectors and a maximum distance of 10km. SFP module supports DDM - digital diagnostics monitoring.

ML-S28-2733-SM-10 is a single-mode 25G WDM SFP28 module with wavelengths Tx1270/Rx1330nm, one LC connector and a maximum distance of 10km. Module supports DDM - digital diagnostics monitoring.. WDM modules use only one optical fiber for bidir

ML-S28-3327-SM-10 is a single-mode 25G WDM SFP28 module with wavelengths Tx1330/Rx1270nm, one LC connector and a maximum distance of 10km. Module supports DDM - digital diagnostics monitoring.. WDM modules use only one optical fiber for bidir

Huawei OSX040N01 is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 40km. The LC connectors in the SFP module have UPC polishing.

Huawei 10G SFP+ DAC cable in 1m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

Huawei 10G SFP+ DAC cable in 3m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

The Huawei active optical cable SFP-10G-AOC10M of Multi Mode type is used for direct connection of two SFP+ ports with a line speed of 10 Gbps. With a length of 10m and a bend radius of 30mm, it is suitable for connecting a pair of

Huawei SFP-10G-ZR is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 80km. The LC connectors in the SFP module have UPC polishing.

Praktická sada nástrojů pro práci s optickými kabely obsahuje nezbytné nástroje pro práci instalačního technika. Základní nástroje slouží pro přípravu optického vlákna ke svařování a ke kontrole nově vytvořené či stávající trasy. Obsah balení; Měřák vý...

Optical ground encloser with the possibility of installation underground or outside, for example on a pole and is used to connect optical cables, in a maximum of 48 fibers in 4 built-in optical cassettes. Each cassette can hold up to

Optical ground encloser with the possibility of installation underground or outside, for example on a pole and is used to connect optical cables, in a maximum of 288 fibers in 12 built-in optical cassettes. Each cassette can hold up t

Optical ground encloser with the possibility of installation underground or outside, for example on a pole and is used to connect optical cables, in a maximum of 288 fibers in 12 built-in optical cassettes. Each cassette can hold up t

XS+85LC01D is a multimode SFP/SFP+SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with a wavelength of 850 nm and two LC connectors for connections up to a distance of 100 m. The mod

The Huawei OptiXstar EN8010Ts-20 is an XGS-PON bridging-type ONT in the Huawei all-optical access solution. It uses the XGS-PON technology to implement ultra-broadband access for users. Auto Port Speeds Auto-adaptive 10000Mbit/s, 50

4-channel CWDM Mux/Demux (1270 to 1330 nm) designed to increase the capacity of existing optical infrastructure, with rack-mountable options.

8-channel CWDM Mux/Demux (1450 to 1590 nm) designed to increase the capacity of existing optical infrastructure, with the option for rack mounting.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

MaxLink 40G QSFP+ DAC cable, passive is a fast and inexpensive solution for easy connection of two network active switch / router elements at 40Gbps without the need to purchase separate modules and other accessories (such as optical patch cable

This cable allows you to connect device with a 40 Gbps QSFP+ port to a 4 others with SFP+ port allowing only 10Gbps transmit speed. The cable is 1 meter long.