MikroTik

Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionali

LDF 5 or "Lite dish feed" is a very specific outdoor CPE device with two built-in antennas with 9dBi gain. LDF 5 was designed for mounting on satellite dish antenna instead of the original feed LNB with 40 mm mounting. Antenna gain maybe increas

The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The

The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in. It has a 600MHz CP

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 19W and

LHGmount is low cost, metallic, easily adjustable holder for all LHG series units, including larger LHG XL models. The unit is installed with 4 screws included in the package. The holder can be mounted on a pipe with a maximum diameter of 58mm.

LHG 60G – a high-speed 60 GHz CPE point-to-multipoint unit, perfect solution for crowded wireless spectrum No need to share the frequency with your neighbors and lose valuable time –

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

You can’t buy safety, but you can buy an RBGESP surge protector and keep your setup safe. RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Here’s what a typical use-case would

hAP ax lite is the perfect small solution, with low acquisition costs and high performance requirements. The device is equipped with a dual-core IPQ-5010 CPU clocked at 800 MHz, 256 MB RAM, 128 MB storage, 4x Gigabit LAN and the lates

The ATL LTE18 kit is a device used to connect to a mobile 3G/LTE network. Put it outside on a pole or just in a high enough place and it's there where cell phones don't have a signal. Thanks to a large radome antenna

The LtAP LR8G LTE6 kit, equipped with the new LTE6 modem, is a compact and robust wireless access point with support for LTE Cat6, LoRa networks, LAN, GPS, a full-featured USB port, and a serial port for debugging. It offers the perfect solution

The LHG 5 ax is a compact and lightweight wireless device with Wi-Fi 6 support for the 5 GHz band, featuring an integrated 24.5 dBi high-gain grid antenna designed for excellent wind resistance. It is ideal for point-to-p

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

No need to buy several antennas for your Internet-of-things setups – just grab the new HGO-LTE-W antenna that can handle an impressive frequency spectrum 699MHz – 3,8GHz. That’s right – you can use the same antenna for LTE, CAT-M/NB and LoRa con

GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on

Thanks to its very strong configuration, it is the perfect device for professionals in busy locations. There is 4x SFP+ with speed 1/10 Gbps and 13x 10 / 100 / 1000Mbps ethernet, console port type RJ45, 4 fans

L11UG-5HaxD powerful Wi-Fi 6 radio with MMCX connectors enables further customization. The board is equipped with 1 gigabit LAN, USB port and Wi-Fi 6 5GHz radio. For powering device there is a DC jack or passive PoE. The maximum power consumption of th

The RB4011 uses the amazingly powerful quad core cortex A15 chip from annapurna labs, an amazon company, same as in your grade rb1100AHx4 unit. The CPU supports IPsec hardware acceleration, there is 1GB of RAM, so this device will easily handle any tas

SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to

The wireless wire offers blazing fast Gigabit speeds for transparent connectivity between two locations, without any sacrifice in your LAN speeds. Simply point the included devices at one another and power them on, they are already preconfigured

The RB912UAG-2HPnD is a very versatile device. It is a small wireless router with an integrated 2.4GHz high power wireless card and an additional miniPCIe slot for 802.11 wireless, or 3G card. The Gigabit port helps to utilize the full potential of 802

The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. T

CRS106-1C-5S is very small, cheap optical switch/router with RouterOS operating system, which includes 5x SFP and 1x combo (SFP / ETH) port. Cloud Router Switch is powered by QCA8511 processor clocked at 400MHz, includes 128MB of RAM

RB5009UPr+S+OUT is a high performance PoE router that comes with passive cooling, IP66 outdoor chassis and high performance (60 - 90% higher than RB4011) which is due to the 64-bit ARM architecture of the proc

MikroTik hEX S is a compact, powerful, and affordable wired router that is an ideal choice for smart homes or small offices. The device features 5 Gigabit Ethernet ports, with Ether1 supporting PoE-in and Ether5 offering PoE-out,

MikroTik Cloud Smart Switch CSS610-8P-2S+IN is a manageable, 8-port Gigabit PoE Switch with two SFP+ slots (backwards compatible with SFP modules as well), without a fan and a kit for attaching to a 19" rack. The Switch has a 140W

S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transeiv