Optical networks

Ubiquiti UOC-2 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 2m length and LC-LC duplex connectors.

Optical SC/UPC Single-mode 9/125um FAST connector with minimum instrumentation requirements for connector installation - the connector does not need to be polished. An optical fiber cleaver, stripping pliers and optical fiber cleaning sol

The UFiber WiFi6 GPON CPE (UF WiFi6) is a point-to-multipoint WiFi 6 device that creates high-speed GPON connections capable of reaching a 2.4 Gbps downstream rate and 1.2 Gbps upstream rate. The UF WiFi6 has (4) GbE RJ45 LAN ports and (1) GPON WAN port t

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance up to 20 kilometers which can basically satisfy the distance requirement of LAN. Users can choos

ML-S+2733-10 is singlemode 10G SFP+ module with 1 LC connector for link at distance up to 10km. It uses 1 optical fiber, Tx/Rx wave length is 1270/1330nm. Module is "cisco compatible", so it is compatible with almost all active dev

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

ML-S+31Dout-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices. The advantage of this pro

Optical Fiber Cable Air1 is high quality micro CLT cable. Optical fibers are situated in jelly-filled central loose tube. The central loose tube is covered with aramid yarn which is the main strenght member. Outer sheat is UV stable and made fro

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

The UACC-OM-SFP28-LR is an optical module that operates at speeds up to 25 Gbps. It operates in Single-mode and guarantees a range of up to 10 km Key features Transfer speed up to 25 Gb/s Range up to 10

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.652.D t

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD,

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 3m or 30m variants. The cable is ideal for creating short connections between switches, routers,

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one LC connector with APC endface polishing. Cable length 1.5 m

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one SC connector with APC endface polishing. Cable length 1.5 m

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

The FTC is a simple Fiber to Copper converter without management. Unlike many other media converters available on market, it has outdoor waterproof case with lock screw, it's mounting bracket can be attached and locked with a screw from inside the case

The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX standards, the MC220L is designed for use with multi-mode/sing

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.657.A2. The pigtail is equipped with one LC connector with UPC endface polishing. Cable length 1.5

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

The EchoLife EG8040H6 is an indoor Optical Network Terminal (ONT). By using the GPON technology, ultra-broadband access is provided for home and SOHO users. The EG8040H6 provides four GE Ethernet ports and features high-p

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switc

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.657.A2. The pigtail is equipped with one SC connector with UPC endface polishing. Cable length 1.5

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products