The Maxlink 10GBT-1-WM is a simple active PoE injector supporting the 802.3af/at/bt standards as well as 10G Ethernet (10/100M/1/2.5/10G). It features a pair of shielded Ethernet connectors (1x input, 1x output), and power i

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

Lead-acid battery with 12V and 120Ah capacity. The battery is equipped with two M8 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 0,5m is terminated with crimped connectors, N female on one side and SMA male on the other. Due to low attenuat

Pigtail with u.Fl and RSMA female connectors, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. This is a quality reduction, eg for connection to miniPCI cards, etc.

Cable convertor from u.Fl to N male, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. This is a quality convertor used, for example, for connecting to miniPCI cards, etc.

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 5m is terminated with crimped connectors, RSMA male on one side and N male on the other. Due to low attenuation

POE-BOX8-G is a passive Gigabit PoE injector suitable for powering up to 8 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For poweri

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 0,3m is terminated with crimped connectors, N female on one side and SMA male on the other. Due to low attenuat

Lead-acid battery with 12V and 7.2Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.

Cable convertor from RSMA male to RSMA male, 25 cm long, designed for the frequency range from 0 to 6 GHz with attenuation max. 1.5 dB. Both connectors are straight. The cable is suitable for connecting units with RSMA female ou

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 2m is terminated with crimped connectors, RSMA male on one side and RSMA female on the other. Due to low attenu

Panel integrating 6 passive Gigabit PoE injectors into a single panel. Professional solution for remote power supply of a large number of active elements with support for passive PoE. By adding this walk-through panel, you get a pow

Pigtail with MMCX and RSMA female connectors, 25cm long, designed for the frequency range 0 to 6GHz with attenuation of max 1.5dB. The MMCX connector is rotated 90°. This is a quality reduction, eg for connection to miniPCI cards, etc.

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 5m is terminated with crimped connectors, N male on one side and SMA male on the other. Due to low attenuation

ML-SFP-RJ45-10G-H3C is a 10 Gbps SFP+ metalic module with an RJ45 connector for metalic cable. This is a Cisco compatible module. The module has range up to 100m (up to 30m for 10G link).

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

The Maxlink BT-1-WM is a simple active PoE injector supporting the 802.3af/at/bt standards as well as 2.5G Ethernet (10/100M/1/2.5G). It features a pair of shielded Ethernet connectors (1x input, 1x output), and power is del

ML-S31D-out-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The Industrial version of the SFP module differs from the normal one wi

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A

Cable adapter with three sockets for connection to UPS with IEC connectors. Specifications Cable length 30 cm Max. operating current 10 A Nominal voltage 250 V IEC C14 plug CEE 7/3 (F)

MaxLink PI90 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 95W. For better distribution of the current load, all 4 pairs of conductors are powered. Can als

Panel integrating 12 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support. You will achieve a

The passive PoE extractor is used to separate data and power connector at the end of the cable. Especially suitable for routers, APs and switches without passive POE support. PoE does not supports 802.3af/at specification. Pins 4,5 (-) and 7,

The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

ML-S31D-40 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 40km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC type grinding.

3-conductor power cord with shielded tinned end of the wires on one side. It is a cable designed to connect industrial power resources to the power supply. This cable has 1.2m length of and does not match the Czech version (the blue lead is conn

RF cable with very low loss of gain and great flexibility with a length of 50 cm and RSMA male - RSMA male connectors. The cable is suitable for both indoor and outdoor use - ideal for MikroTik BaseBox, UBNT Rocket and other products.

RF cable with very low loss of gain and great flexibility with a length of 15 cm and RSMA male - RSMA male connectors. The cable is suitable for both indoor and outdoor use - ideal for MikroTik BaseBox, UBNT Rocket and other products.