MikroTik

If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and b

LHG 60G – a high-speed 60 GHz CPE point-to-multipoint unit, perfect solution for crowded wireless spectrum No need to share the frequency with your neighbors and lose valuable time –

Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G c

SolidMOUNT je kovový, precizní, nastavitelný držák s jemným lazením pomocí dvou postranních šroubů s matkami. Držák je kompatibilní se všemi jednotkami ze série LHG, včetně větších LHG XL modelů. Na jednotku se instaluje pomocí 4 šroubků, jenž jsou sou

The RB4011 uses the amazingly powerful quad core cortex A15 chip from annapurna labs, an amazon company, same as in your grade rb1100AHx4 unit. The CPU supports IPsec hardware acceleration, there is 1GB of RAM, so this device will easily handle any tas

The S-55DLC80D is a singlemode Gigabit SFP module with a 1550nm wavelength, two LC connectors and maximum distance up to 80km. The module iscompatible with all MikroTik products, that have SFP or SFP+ cages and other cisco compliant devices.

TPA-SMA is a TwistPort converter adapter from TwistPort to (2) RSMA-female connectors. The adapter allows connect any two-polarized radio to be connected by RF cables. The adapter is capable of operating in the 5180 to 6400MHz band. RSMA f

5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all MikroTik products with SFP/SFP+ ports, including new

±48 V DC telecom Open Frame Power supply with 12 V 8 A output, for use with new “r2” revision of Cloud Core Routers. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for -48 V installations. Compatibility

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga

LHGmount is low cost, metallic, easily adjustable holder for all LHG series units, including larger LHG XL models. The unit is installed with 4 screws included in the package. The holder can be mounted on a pipe with a maximum diameter of 58mm.

The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside. T

MikroTik netPower 15FR is a reverse PoE switch with 16x 100Mbit ethernet ports, two SFP ports, DC power connector and two operating systems (ROS and SwOS). The first 15 LAN ports allow power through PoE IN and 16th port supports PoE o

Power adapter with output voltage 48V DC, maximum current 0.95A, total output power 45,6W and connector 5.5 / 2.1mm. The power source is part of the MikroTik GPEN concept, which provides all the benefits of GPON.

Power adapter with output voltage 57V DC, maximum current 0.8A, total output power 45,6W and connector 5.5 / 2.1mm. The power source is part of the MikroTik GPEN concept, which provides all the benefits of GPON.

MikroTik K-65 is a set of rack-mount ears used to mount your RB4011 into a 19" rack. Due to the very low clearance height of the RouterBOARD, it only takes 1U.

Wi-Fi has to be fast, reliable, easy to manage, it must reach every room and every corner. That is exactly what Audience devices can deliver in grand style – even in the biggest houses!

wAP LR9 kit – an out-of-the-box solution to use LoRa® technology. This kit contains a pre-installed UDP packet forwarder to any public or private LoRa® servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet p

MikroTik GB60A-S12 is a replacement internal power supply that is specially designed for some MikroTik devices. Total power is 60W at 12V and 5A max. current. Compatible with CCR1016 r2 models

MikroTik UP1302C-12 is a replacement internal power supply that is specially designed for some MikroTik devices. Total power is 130W at 12V and 10.8A max. current. Compatibility list CCR1036-8G-2S+EM (rev. 2) CCR1

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The P1 license has a speed limit of 1 Gbit for uploading to the interface and the lossy parameters are based on t

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The P10 license has a speed limit of 10 Gbit for uploading to the interface and the lossy parameters are based on

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The PU license does not have a speed limit, other parameters are based from the L6 license. Minimum

StationBox is a compact outdoor enclosure for wireless platforms, access points, and all things IoT. StationBox ALU-Mini is a customizable solution for wide range of applications whenever a reliable and durable enclosure is necessary.

The RB450Gx4 is an Ethernet router with five Gigabit Ethernet ports, a serial port, 512 MB NAND memory and a microSD card slot. In addition, it supports full 10 V - 57 V input by two power jacks or PoE (802.3af/ at or passive PoE) and can provide PoE o

MikroTik power adapter with 5V voltage, maximum current 1A, max. Power 5W and microUSB connector. This power source is suitable, for example, for MikroTik hAP mini, hAP lite and cAP lite.

Thanks to the implementation of the RB911 into the existing mANT type sector antenna, a new transmitting unit designed for ISP providers was created, ideal for connecting clients over longer distances. Inside the sector antenna is a ve

Cable reduction from MMCX to RSMA female, 26 cm long, intended for the frequency band from 2 to 6 GHz. The MMCX connector is angled and the RSMA female is straight. This is a high-quality connection, e.g. in BaseBox2 or BaseBox5 devic

The CWDM is a passive MUX/DEMUX unit, which allows to combine up to eight fiber links into one, to simplify and reduce the cost of long distance fiber installations. At the other location, the combined line is split back up again, so that instead of ei

S-C53DLC40D is a singlemode 1.25G SFP CWDM module with a 1530nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov